Binary Signal App 1.9 Download Android APK | Aptoide

How To Install And Run Borderlands 2 On Linux – Proton ⁄ Fixed Marcus Introduction & Cinematics

Hi everyone.
I've recently produced a video on how I got Borderlands 2 to work through Proton, check it out below and let me know what you think.
https://www.youtube.com/watch?v=StPRBwPZE_c&feature=youtu.be
More specifically it covers how actually launch the game and fix the Marcus introduction cinematic so that it plays correctly and does not crash the game.
Alternatively for people who prefer a written guide see below:
STEP 1 – INSTALL THE GAME AND FORCE THE GAME TO LOAD WITH PROTON
Right click on the Properties of the game, tick the Force the use of a specific Steam Play compatibility tool option, click OK, and then install the game as normal.
STEP 2 – RENAME THE BORDERLANDS 2.EXE TO LAUNCHER.EXE
Right click on the game, go to Properties, LOCAL FILES, BROWSE LOCAL FILES, and in the window that appears click on the Binaries folder, and from there click on Win32.
Inside that folder rename Launcher.exe to Launcher.exe.old and Borderlands2.exe to Launcher.exe.
You will now be able to launch the game, and manually set your graphical options, so do that and exit the game once done.
STEP 3 – FIX THE CINEMATICS AND CUTSCENE VIDEOS
Download the first Media Foundation Wine Workaround script at: https://github.com/z0z0z/mf-install
Click on the green Code button, choose the Download ZIP option, extract the downloaded archive and open up a Terminal window in that folder.
In the Terminal window you want to type something similar to the following referencing where the game is installed on your system, which in my case is:
WINEPREFIX="/home/ryanj/.local/share/Steam/steamapps/compatdata/49520/pfx" ./mf-install.sh
Once done, download the second Media Foundation Wine Workaround script which can be found at: https://github.com/z0z0z/mf-installcab
Once again, click on the green Code button, choose the Download ZIP option, extract the downloaded archive and open up a Terminal window in that folder.
In the Terminal window you want to type something similar to the following referencing where the game is installed on your system, which in my case is:
WINEPREFIX="/home/ryanj/.local/share/Steam/steamapps/compatdata/49520/pfx" ./install-mf-32.sh
All you need to do at this point is copy the mfplat.dll to the game’s application folder.
The easiest method for doing that is to open up Steam, right click on the game, click on Properties, LOCAL FILES, BROWSE LOCAL FILES, and paste the dll in the window that appears.
STEP 4 – ADDITIONAL PERFORMANCE TWEAKS
Add the following to the game's custom launcher options: __GL_THREADED_OPTIMIZATIONS=1 PROTON_USE_D9VK=1 %command%
After all this is done, the game should function the same as running it on Windows.
If you found this helpful, please consider checking out all the other content on my channel and subscribing to support me.
Many Thanks
Ryan
submitted by Intelligent-Gaming to SteamPlay [link] [comments]

How To Install And Run Borderlands 2 On Linux – Proton ⁄ Fixed Marcus Introduction & Cinematics

Hi everyone.
I've recently produced a video on how I got Borderlands 2 to work through Proton, check it out below and let me know what you think.
https://www.youtube.com/watch?v=StPRBwPZE_c&feature=youtu.be
More specifically it covers how actually launch the game and fix the Marcus introduction cinematic so that it plays correctly and does not crash the game.
Alternatively for people who prefer a written guide see below:
STEP 1 – INSTALL THE GAME AND FORCE THE GAME TO LOAD WITH PROTON
Right click on the Properties of the game, tick the Force the use of a specific Steam Play compatibility tool option, click OK, and then install the game as normal.
STEP 2 – RENAME THE BORDERLANDS 2.EXE TO LAUNCHER.EXE
Right click on the game, go to Properties, LOCAL FILES, BROWSE LOCAL FILES, and in the window that appears click on the Binaries folder, and from there click on Win32.
Inside that folder rename Launcher.exe to Launcher.exe.old and Borderlands2.exe to Launcher.exe.
You will now be able to launch the game, and manually set your graphical options, so do that and exit the game once done.
STEP 3 – FIX THE CINEMATICS AND CUTSCENE VIDEOS
Download the first Media Foundation Wine Workaround script at: https://github.com/z0z0z/mf-install
Click on the green Code button, choose the Download ZIP option, extract the downloaded archive and open up a Terminal window in that folder.
In the Terminal window you want to type something similar to the following referencing where the game is installed on your system, which in my case is:
WINEPREFIX="/home/ryanj/.local/share/Steam/steamapps/compatdata/49520/pfx" ./mf-install.sh
Once done, download the second Media Foundation Wine Workaround script which can be found at: https://github.com/z0z0z/mf-installcab
Once again, click on the green Code button, choose the Download ZIP option, extract the downloaded archive and open up a Terminal window in that folder.
In the Terminal window you want to type something similar to the following referencing where the game is installed on your system, which in my case is:
WINEPREFIX="/home/ryanj/.local/share/Steam/steamapps/compatdata/49520/pfx" ./install-mf-32.sh
All you need to do at this point is copy the mfplat.dll to the game’s application folder.
The easiest method for doing that is to open up Steam, right click on the game, click on Properties, LOCAL FILES, BROWSE LOCAL FILES, and paste the dll in the window that appears.
STEP 4 – ADDITIONAL PERFORMANCE TWEAKS
Add the following to the game's custom launcher options: __GL_THREADED_OPTIMIZATIONS=1 PROTON_USE_D9VK=1 %command%
After all this is done, the game should function the same as running it on Windows.
If you found this helpful, please consider checking out all the other content on my channel and subscribing to support me.
Many Thanks
Ryan
submitted by Intelligent-Gaming to wine_gaming [link] [comments]

How To Install And Run Borderlands 2 On Linux – Proton ⁄ Fixed Marcus Introduction & Cinematics

Hi everyone.
I've recently produced a video on how I got Borderlands 2 to work through Proton, check it out below and let me know what you think.
https://www.youtube.com/watch?v=StPRBwPZE_c&feature=youtu.be
More specifically it covers how actually launch the game and fix the Marcus introduction cinematic so that it plays correctly and does not crash the game.
Alternatively for people who prefer a written guide see below:
STEP 1 – INSTALL THE GAME AND FORCE THE GAME TO LOAD WITH PROTON
Right click on the Properties of the game, tick the Force the use of a specific Steam Play compatibility tool option, click OK, and then install the game as normal.
STEP 2 – RENAME THE BORDERLANDS 2.EXE TO LAUNCHER.EXE
Right click on the game, go to Properties, LOCAL FILES, BROWSE LOCAL FILES, and in the window that appears click on the Binaries folder, and from there click on Win32.
Inside that folder rename Launcher.exe to Launcher.exe.old and Borderlands2.exe to Launcher.exe.
You will now be able to launch the game, and manually set your graphical options, so do that and exit the game once done.
STEP 3 – FIX THE CINEMATICS AND CUTSCENE VIDEOS
Download the first Media Foundation Wine Workaround script at: https://github.com/z0z0z/mf-install
Click on the green Code button, choose the Download ZIP option, extract the downloaded archive and open up a Terminal window in that folder.
In the Terminal window you want to type something similar to the following referencing where the game is installed on your system, which in my case is:
WINEPREFIX="/home/ryanj/.local/share/Steam/steamapps/compatdata/49520/pfx" ./mf-install.sh
Once done, download the second Media Foundation Wine Workaround script which can be found at: https://github.com/z0z0z/mf-installcab
Once again, click on the green Code button, choose the Download ZIP option, extract the downloaded archive and open up a Terminal window in that folder.
In the Terminal window you want to type something similar to the following referencing where the game is installed on your system, which in my case is:
WINEPREFIX="/home/ryanj/.local/share/Steam/steamapps/compatdata/49520/pfx" ./install-mf-32.sh
All you need to do at this point is copy the mfplat.dll to the game’s application folder.
The easiest method for doing that is to open up Steam, right click on the game, click on Properties, LOCAL FILES, BROWSE LOCAL FILES, and paste the dll in the window that appears.
STEP 4 – ADDITIONAL PERFORMANCE TWEAKS
Add the following to the game's custom launcher options: __GL_THREADED_OPTIMIZATIONS=1 PROTON_USE_D9VK=1 %command%
After all this is done, the game should function the same as running it on Windows.
If you found this helpful, please consider checking out all the other content on my channel and subscribing to support me.
Many Thanks
Ryan
submitted by Intelligent-Gaming to linux_gaming [link] [comments]

How To Install And Run Borderlands 2 On Linux – Proton ⁄ Fixed Marcus Introduction & Cinematics

Hi everyone.
So it is widely considered that the Linux port of Borderlands 2 is poor at best, so the next best thing is to run the Windows version through Proton, which is exactly what my latest video covers.
https://www.youtube.com/watch?v=StPRBwPZE_c&feature=youtu.be
More specifically it covers how actually launch the game and fix the Marcus introduction cinematic so that it plays correctly and does not crash the game.
Alternatively for people who prefer a written guide see below:
STEP 1 – INSTALL THE GAME AND FORCE THE GAME TO LOAD WITH PROTON
Right click on the Properties of the game, tick the Force the use of a specific Steam Play compatibility tool option, click OK, and then install the game as normal.
STEP 2 – RENAME THE BORDERLANDS 2.EXE TO LAUNCHER.EXE
Right click on the game, go to Properties, LOCAL FILES, BROWSE LOCAL FILES, and in the window that appears click on the Binaries folder, and from there click on Win32.
Inside that folder rename Launcher.exe to Launcher.exe.old and Borderlands2.exe to Launcher.exe.
You will now be able to launch the game, and manually set your graphical options, so do that and exit the game once done.
STEP 3 – FIX THE CINEMATICS AND CUTSCENE VIDEOS
Download the first Media Foundation Wine Workaround script at: https://github.com/z0z0z/mf-install
Click on the green Code button, choose the Download ZIP option, extract the downloaded archive and open up a Terminal window in that folder.
In the Terminal window you want to type something similar to the following referencing where the game is installed on your system, which in my case is:
WINEPREFIX="/home/ryanj/.local/share/Steam/steamapps/compatdata/49520/pfx" ./mf-install.sh
Once done, download the second Media Foundation Wine Workaround script which can be found at: https://github.com/z0z0z/mf-installcab
Once again, click on the green Code button, choose the Download ZIP option, extract the downloaded archive and open up a Terminal window in that folder.
In the Terminal window you want to type something similar to the following referencing where the game is installed on your system, which in my case is:
WINEPREFIX="/home/ryanj/.local/share/Steam/steamapps/compatdata/49520/pfx" ./install-mf-32.sh
All you need to do at this point is copy the mfplat.dll to the game’s application folder.
The easiest method for doing that is to open up Steam, right click on the game, click on Properties, LOCAL FILES, BROWSE LOCAL FILES, and paste the dll in the window that appears.
STEP 4 – ADDITIONAL PERFORMANCE TWEAKS
Add the following to the game's custom launcher options: __GL_THREADED_OPTIMIZATIONS=1 PROTON_USE_D9VK=1 %command%
After all this is done, the game should function the same as running it on Windows.
If you found this helpful, please consider checking out all the other content on my channel and subscribing to support me.
Many Thanks
Ryan
submitted by Intelligent-Gaming to linux4noobs [link] [comments]

List of New Supported Games and FAQ.

Hey guys! Here is a list of all the new supported games, you can download the Nucleus Co-Op scripts from the app now, the games listed here that are clickable link you to a guide but all are supported. You can also see all available scripts from the app now by pressing the view all option.
10 Miles to Safety
20XX
100% Orange Juice
200% Mixed Juice!
Abyssal Zone
Acceleration of SUGURI 2
A Hat in Time
Air Missions: HIND
Alien Breed Impact
Alien Breed 2: Assault
Alien Breed 3: Descent
Aliens Colonial Marines
Aliens vs Predator
Alien Swarm: Reactive Drop
Aragami: Shadow Edition
ARK: Survival Evolved
Ashen (steam version only)
Astroneer
Attack on Titan 2
ATV Drift & Tricks
Barony
Binary Domain
BioShock 2
Bit Dungeon III
Blades of Time
Bladestorm: Nightmare
Blood and Bacon
Bob Was Hungry
Borderlands
Borderlands 2
Borderlands: The Pre-Sequel
Borderlands GOTY Enhanced
Borderlands 3
Broomstick League
Bulletstorm: Full Clip Edition
Bunch of Heroes
CastleMiner Z
Clandestine
Cladun Returns: This is Segoku
Chivalry: Medieval Warfare
Citadel: Forged With Fire
Code of Princess
Conan Exiles (16 june 2020 update added Funcom Live Services and now the game is online only effectively breaking the splitscreen script. You need to downgrade to the previous version.)
Contagion
Contra: Rogue Corps
Counter-Strike: Source
Cube World
Cyberdimension Neptunia: 4 Goddesses Online
Daemon X Machina
Damnation
Dark Souls: Prepare to Die Edition
Day of Defeat: Source
Day of Infamy
Deadfall Adventures
Dead Island
Dead Island: DE
Dead Island Riptide: DE
Dead Rising 2
Dead Rising 2: Off the Record
Dead Rising 3
Dead Rising 4
Deathtrap
Debris
Deep Rock Galactic
Desolate
Dinosaur Hunt
Divinity: Dragon Commander
Divinity: Original Sin Enhanced Edition
Divinity: Original Sin 2
Don't Starve Together
Door Kickers
Dragon Ball Xenoverse
Dragon Ball: Xenoverse 2
Dragon Marked for Death
Dragon Quest Builders 2
Dungeon of the Endless
Dungeons 3
Dungeon Siege III
Dying Light
Dystopia
Earth Defense Force 4.1
Earth Defense Force 5
Earth Defense Force: Insect Armageddon
Earth Defense Force: Iron Rain
Earthfall
Enemy Front
F1 2012
Fade to Silence
Factorio
Fallout 76
F.E.A.R. 3
Final Exam
Feel The Snow
Fight The Dragon
Fistful of Frags
Forge Quest
Fortified
Front Mission Evolved
Full Mojo Rampage
Garry's Mod
Gas Guzzlers Extreme
Generation Zero
GOCCO OF WAR
God Eater Resurrection
God Eater 2 - Rage Burst
God Eater 3
God Mode
Grim Dawn
Ground Branch
GTFO
Guns n Zombies
Half-Life Deathmatch: Source
Half-Life 2: Deathmatch
Half-Minute Hero: The Second
Halo Custom Edition
Halo 2 LAN
Halo 2: Project Cartographer
Halo Online ElDewrito
Halo: The Master Chief Collection
Halo Wars: Definitive Edition
Hammerwatch
Hero Siege
Hunted: The Demon’s Forge
Human: Fall Flat
I am Weapon: Revival
Insurgency
Iron Brigade
It came from space, and ate our brains
KATANA KAMI: A Way of the Samurai Story
Killing Floor
Killing Floor 2
Killsquad
Kill to Collect
Lead and Gold: Gangs of the Wild West
Left 4 Dead 2
LEGO Worlds
Livelock
Lord of the Rings War in the North
Magicite
Mean Greens - Plastic Warfare
Mighty No. 9
Minecraft Java Edition
Monday Night Combat
Morphies Law
Mothergunship
NanoWars
Necropolis
Need For Speed Most Wanted 2005
Nioh: Complete Edition
Niffelheim
No Man's Sky
No More Room in Hell
Outbreak
Outbreak: TNN
Outland
Outward
Orcs Must Die! 2
ORION: Prelude
OVERKILL's The Walking Dead
Pacify
PAYDAY: The Heist
PAYDAY 2
Pirates, Vikings, and Knights II
PixARK
Portal Knights
Prevent The Fall
Primal Carnage: Extinction
Pure
Raft
Rage
Remnant: From the Ashes
Resident Evil 5
Resident Evil 6
Resident Evil Revelations
Re-Volt (RVGL)
RimWorld
Risk of Rain 2
Roguelands
Ryse: Son of Rome
Sacred 3
Saints Row The Third
Saints Row IV
Saints Row: Gat out of Hell
Sanctum
Sanctum 2
Scourge Outbreak
Secrets of Grindea
Senran Kagura: Shinovi Versus
Senran Kagura: Estival Versus
Senran Kagura: Peach Beach Splash
Serious Sam 2
Seven Days to Die
Sir, You Are Being Hunted
SkyDrift
Sniper Elite 3
Space Engineers
Space Hulk: Deathwing - Enhanced Edition
Spec Ops: The Line
Spintires
Starbound
Stardew Valley
Star Wars: Battlefront 2 (Classic, 2005)
Strange Brigade
Strength of the Sword: ULTIMATE
Styx: Shards of Darkness
Super Mario 64
Survivalist
Sven Coop
Sword Art Online Re: Hollow Fragment
Sword Art Online: Lost Song
Sword Art Online: Hollow Realization Deluxe Edition
Synergy
SYNTHETIK: Arena
SYNTHETIK: Legion Rising
Takedown: Red Sabre
Team Fortress 2
Teenage Mutant Ninja Turtles: Mutants in Manhattan
Teenage Mutant Ninja Turtles: Out of the Shadows
Terraria
TerraTech
The Blackout Club
The Darkness 2
The Forest
The Haunted: Hells Reach
theHunter: Call of the Wild
The Incredible Adventures of Van Helsing
The Incredible Adventures of Van Helsing II
The Incredible Adventures of Van Helsing III
The Incredible Adventures of Van Helsing Final Cut
The Mean Greens - Plastic Warfare
The Simple Apocalypse
The Watchers
Tokyo Ghoul:re Call to Exist
Tom Clancy's Rainbow Six: Vegas 2
Tomb Raider
Torchlight II
Toukiden: Kiwami
Toukiden 2
Unending Dusk
Unepic
Unloved
Unreal Tournament III
Umbrella Corps
Vagante
Warcraft III: The Frozen Throne
Warcraft III: Reign of Chaos
Warhammer 40,000: Space Marine
We Were Here Together
White Noise 2
World in Conflict: Complete Edition
Wreckfest
XCOM: Enemy Within
Zeno Clash II
Zombie Army Trilogy
Zombie Panic! Source

Frequently Asked Questions & Troubleshooting

(Under Construction, last updated: 06/06/20)
Q: What is Nucleus Co-Op?
A: https://www.youtube.com/watch?v=jbituCgu3Bc
Nucleus Co-Op is a free and open source tool for Windows that allows split-screen play on many games that do not initially support it. The app was originally created by Lucas Assis, Zerofox later took over and added a ton of new features and improvements to support a lot more games. Ilyaki later joined in and brought multiple keyboards/mice support and more great features to the table. The app is currently being developed and updated by these devs: Lucas Assis, Zerofox and Ilyaki.
R-mach too for making and supporting the website that hosts the Nucleus Co-Op scripts.
Also the further development of the app wouldn't have been possible without all the amazing contributions and hard work from the SplitScreen Dreams Discord members (which include the devs mentioned above) that made all the new Nucleus Co-Op scripts and continue to make new discoveries and scripts to support even more games, among them: Talos91, PoundlandBacon, dr. old.boi, Pizzo and many more.
Q: How does Nucleus Co-Op work?
A: Essentially Nucleus Co-Op opens multiple instances of the same game (some games require mutex killing for that or other methods) that will only answer to one specific gamepad (we do this via Nucleus Co-Op custom xinput dlls or xinput plus dlls) and connects those instances via LAN or steamworks online multiplayer emulation (Goldberg Emulator), all while making sure all windows have focus so they can be playable with gamepads or that the instances are playable even in the background. Nucleus then resizes, removes borders and repositions the games windows so you can have synthetic splitscreen to play locally with your friends.
Q: Which games can be splitscreened using Nucleus Co-Op?
A: There are a lot of supported games, all mentioned in the list above. A ton of games are now supported thanks to the amazing program called Goldberg Emulator, developed by Mr. Goldberg, a big thank you to him. Read the Goldberg FAQ linked too if you want to know more.
Q: Where do I download Nucleus Co-Op?
A: You can download latest version from Github. Download the compiled .rar release, don't download the source code zip if you just want to use the app.
Q: How do I use Nucleus Co-Op?
A: Here is a quick video tutorial: https://www.youtube.com/watch?v=hWmvz59i-o0
1.- Download and exctract Nucleus Co-Op (extract using apps like 7-zip or winrar).
2.- Open NucleusCoop.exe.
3.- Click on Download Game Scripts, search for a game in the supported games list and download a script. You can also see all available scripts from the app now by pressing the view all option.
4.- Once the script has finished downloading you will get a prompt asking if you would like to add a game now, press yes if you want to add it now, if you select no proceed to step 6.
5.- Next you need to find where your game's executable is located. If you're not sure, try Googling 'where is (game) installed' and just searching for .exe in the place they tell you to look. For Steam games this is usually something along the lines of 'C:\Program Files\Steam\steamapps\common(game)'. Some games will have their real .exe stashed away in a folder called 'bin' or 'binaries' inside that place. Once you choose the right .exe, add the game.
6.- You can also automatically add games, click 'Auto-Search' and select the drive and path you want to add games from.
7.- Once your game is added, select it in the Nucleus UI and drag the gamepads icons to the splitscreen layout, click on the top-left icon on the layout corner to change the type of splitscreen layout. You can also right click a player in the layout to change the size.
8.- Finally press play and you are ready to go.
Q: Where should I place the Nucleus Co-Op folder?
A: Nucleus Co-Op can be placed almost anywhere(Documents, Downloads, Desktop, etc...) except inside the game files.
Q: How do I play with an uneven amount of players (such as 3 players) without having an empty space?
A: Right click on a section of the splitscreen layout
Q: Nucleus Co-Op doesn't launch, how do I fix it?
A: Here are a few things you can try:
1.- Try updating your Microsoft.net framework, and install/reinstall Visual C++ 2010-2017.
2.- Run Nucleus Co-Op as admin.
3.- Make sure your antivirus program is not blocking Nucleus Co-Op.
4.- Restart your PC, and try again.
Q: I wish to help out with the project, how can I get in touch?
A: Join the Nucleus Co-Op discord community or contact us here in the subreddit.
Q: When support for X game?
A: Not all games are easy to splitscreen, if you want to suggest a game make a post with the title [Request] Name of the game and provide useful information like if the game supports LAN or dedicated servers, if it is available on Steam or in other services, if it uses external servers for online etc. Also you can contact any of our experienced Nucleus scripters here or in the Nucleus Co-Op discord and ask if a script is possible. The main scripter is the OP of this post for instance. Remember that Scripters are limited by the games they own and can test on, so if you really want support for a game to be added consider donating the game to the scripter in question.
Q: How do I know when a script gets updated?
A: Scipt updates are always announced in the Nucleus Co-Op discord server in the channel script updates.
Q: How do I create my own splitscreen script for Nucleus Co-Op?
A: Here is the documentation, open the .js file with notepad to read it. You can also use the other scripts you download from Nucleus as reference, they get downloaded to the Nucleus scripts folder. If you create a working script or if you have any questions about Nucleus scripting you can ask us in the Nucleus Co-Op discord or here in the subreddit, we can help you improve your script so it is fully working for sharing with the community.
Q: Does Nucleus Co-Op work on Linux/Mac?
A: Nucleus Co-Op depends on a lot of Windows functions and APIs, at the moment it only works on Windows 7 and Up. If you are interested in porting Nucleus Co-Op to other operating systems please feel free to contact any of the developers.
Q: Where can I report a bug/issue?
A: Note that Nucleus Co-Op is a tool in development and still in Alpha. Expect bugs, glitches and weird things to happen. Help other people not have these things happen by checking for a solution here and submitting a [BUG REPORT] to the reddit as a new topic or in the comments here, if no-one else has brought it up.
A good [BUG REPORT] looks like this:
Thread name: [BUG REPORT] Simon falling off horse
BUG: Simon falls off his horse.
EXPECTED: Simon should not fall off his horse, right?
CAUSE: I'm pretty sure it's because I have my computer plugged into an auto-blow.
STEPS TO REPRODUCE
1.- Open up Simon Stays On His Horse: The Interactive Video Game of the Movie.
2.- Choose Co-Op and join with another player.
3.- Simon falls off his horse!!!
TYPE: Severe! The gameplay can't continue if Simon isn't on his horse! (Alternatively, Minor if the gameplay can continue but it's just annoying)
NUCLEUS OPTIONS: I played with 2 players using the vertical splitscreen (left and right) on one tv and 2 famicom controllers. I'm using the latest version
SYSTEM: I'm on Windows 3.1 with 4MB of RAM, a 2KHz CPU and no graphics card, playing on a projector. She's a monster.
I'd really like this to get fixed please thanks magic man! -Beanboy"
Keep in mind most scripts are made and tested using the latest legit steam versions of the game, so provide information about what version of the game you have.
Also provide a debug log of the NucleusCoop error, enable the debug log in Nucleus UI settings. You can also ask for support in our discord.
Q: Why is Nucleus Co-Op resizing the game instances incorrectly/the instances look stretched?
A: Try setting your monitor scale to 100% in your monitoTV resolution settings. It is also highly recommended that you add custom resolutions to all your monitors from your AMD/Nvidia/Intel panel (For example if you are using a monitor resolution of 1920x1080 add custom resolutions like 960x540, 1920x540, 960x1080, ect.) that way most games will be able to see and use those custom resolutions and the splitscreen will not look stretched(Example). Note that not all games support custom or widescreen resolutions. Also try disabling the Nucleus status bar in Nucleus UI settings.
Q: Why is Nucleus Co-Op throwing an error message that it can not find a file when launching a script?
A: A lot of scripts edit the game's .ini or .cfg files to force windowed and to adjust the game resolution, so make you sure you run your game at least once and change some graphic settings before running it via Nucleus Co-Op, that way you make sure the config files are getting generated first. If you are still getting the error after doing that, select the game in the UI, click on Game Options and select Delete UserProfile Config Path for all players. Also try disabling the Nucleus status bar in Nucleus UI settings.
Q: Where are my Nucleus Co-Op save files located?
A: Some scripts save to the Nucleus Co-Op enviroment folder located in C:\Users\YourUser\NucleusCoop, you can access each game save file via the Nucleus Co-Op UI too, select a game, click on Game Options and select Open UserProfile Save/Config Path. Other scripts just save in the same file path your regular game saves to.
Q: Why are my in-game frames per second low/better in one instance than in the others when using Nucleus Co-Op?
A: Remember that Nucleus Co-Op opens multiple instances of a game, so depending on the game this can be quite demanding for your PC, to improve FPS and performance try reducing graphics settings like textures and shadows, limit the FPS or unfocus all the game windows so that they get equal priority and the FPS even out, you can do this by Alt-Tabbing to a different window like the Nucleus app window, the game windows will still remain on top, you can also press the windows key+b in your keyboard to unfocus all instances.
Q: My Playstation/generic PC controller isn't working/isn't being detected by Nucleus Co-Op, how do I fix it?
A: Most Nucleus Co-Op Scripts only detect Xinput gamepads. Controllers that work best are Xbox 360, Xbox One and Logitech game controllers for minimum hassle. There are a few scripts that also support Direct Input gamepads but Xinput gamepads are generally easier to restrict to a specific game instance than Dinput gamepads.
If you are using PS4 gamepads try the app DS4windows, look in the settings for an option called "hide ds4 controller" - make sure it's ticked. To ensure it's definitely running in exclusive mode make sure ds4windows is set to load on windows startup, then turn your controllers on while windows is loading. Download the latest version here - https://ryochan7.github.io/ds4windows-site/
If you are using generic dinput gamepads the app XOutput is also useful to emulate xinput gamepads.
The app X360CE version 4 that creates virtual Xbox 360 Controllers inside your Windows operating system is also very useful to emulate xinput gamepads system wide.
Remember that some games detect both dinput and xinput gamepads so even if you are emulating a xinput gamepad the input could still not be restricted correctly because the game is now responding to both the emulated xinput gamepad and to the native direct input of your gamepad, that is why some apps like DS4windows have an "exclusive mode".
Also do not place x360ce xinput dlls in the Nucleus Co-Op files as this might interfere with Nucleus custom xinput dlls.
If you are using steam controllers try this: https://www.youtube.com/watch?v=wy4F2eqTXQ4
Q: Why is my keyboard not showing in the Nucleus Co-Op UI?
A: If a script is only showing gamepads and not keyboard icons that means the script only supports gamepads and doesn't support keyboards and mice in splitscreen yet.
Q: There are many keyboards and mice icons in the UI, how do I know which ones to use?
A: If you press a key in the keyboard you will use or move the mouse their corresponding icons in the Nucleus Co-Op UI will light up yellow. The app can detect keyboard macros that is why sometimes you will get multiple keyboard icons.
Q: Can you play splitscreen+LAN in different PCs?
A: Yes, if you run the game via Nucleus Co-Op in different PCs you can connect all instances you launch via LAN, for example you can have 2 players playing vertical splitscreen in one PC via Nucleus and connect to 2 others playing Nucleus splitscreen in a different PC via LAN. If the script uses steamworks multiplayer emulation you'll have to change the instances steam ids in the other PCs you'll connect to, otherwise the instances launched by Nucleus will use the same steam ids and won't be able to connect to each other. For that you can open the game script .js file in Nucleus scripts folder in the other PCs and add for example Game.PlayerSteamIDs = [ "76561198134585131","76561198131394153","76561198011792067","76561198043762785" ]; that will change the default ids of the first four instances you open in one PC via Nucleus Co-Op.
Q: Does Nucleus Co-Op have any malware?
A: Absolutely not.
Q: This project is Amazing where can I donate?
A: We don't have an unified donation platform yet but you can support the devs individually here: Zerofox, Ilyaki, Lucas Assis.
You can also donate to our main scripters that make the game scripts for Nucleus: Talos91/blackman9
submitted by blackman9 to nucleuscoop [link] [comments]

MAME 0.220

[ Removed by reddit in response to a copyright notice. ]
submitted by cuavas to emulation [link] [comments]

Success To Be [OC, M.2 DualBoot, AMD R5, RX 5700 XT, 16GB RAM, BCM94360CD]

Success To Be [OC, M.2 DualBoot, AMD R5, RX 5700 XT, 16GB RAM, BCM94360CD]
--OUT OF DATE--

OpenCore AMD DualBoot Hackintosh! This would absolutely not have been possible without this community and especially Khronokernel! Many, many thanks - this is my first Hackintosh and self-built PC!! :D
https://preview.redd.it/ciem302abff41.png?width=1920&format=png&auto=webp&s=e8d551bec88509a6ff164d27c528dde794a3070a

Components

See also: OpenCore config below!
Part Model
Motherboard MSI B450 GAMING PRO CARBON AC ATX AM4
CPU AMD Ryzen 5 3600X 3.8GHz 6C
Video Card PowerColor Radeon RX 5700 XT 8GB Red Devil
Memory G.Skill Ripjaws V 2 x 8 GB DDR4-3200C14
Storage ADATA XPG SX8200 Pro 2TB M.2-2280 NVMe SSD
Power Supply Corsair HX750 750W 80+ Platinum Certified Fully Modular ATX
CPU Cooler Noctua NH-D15S
Case Fan 2x Noctua NF-A14 PWM 140 mm
Thermal Paste Thermal Grizzly Kryonaut, 1g
Case Fractal Design Meshify C ATX Mid Tower
Monitor AOC 24G2U/BK 24" 1920x1080 144Hz
Keyboard Apple MB110LL/B Wired
Mouse Logitech G Pro Wireless Optical
Wifi/BT Card via PCIe Fenvi BCM94360CD, AliExpress (Fenvi FV-A436CD)
USB 3.0 PCIe Card Some cheap thing (no brand found?!) I had laying around, not expected to work on macOS, good on Win10
PCPartPicker Part List (without BCM94360CD) About $1600, most parts - especially the expensive ones - where bought on sale, though!
I had these goals in mind:
  • Hackintosh, of course!
  • DualBoot
  • 2K Performance (Everyday PCing to AAA Gaming) with proper heat management, unlike Apple
  • Longevity, my previous Main, a MacBookPro 13'' (Early 2011), still flourishes! :) Good boi!
  • Low noise, hence the Powercolor Graphics Card and the beefy NH-D15S (also for performance)
  • As little dust as possible (see case)
  • As small as possible - without compromising on goals
  • As little RGB as possible (sorry.), which turns out to be difficult
Max credit goes here and here!! Also, here, here, here, here and here. Totally solid work, guys! This Project was started on December, 1st 2019. Now it is February, 7th 2020!

Features

  • Vanilla Hackintosh
  • OpenCore 0.5.5
  • DualBoot on one 2TB M.2 SSD with Win10
  • AMD Ryzen 5 Processor with RX 5700 XT (Navi 10) and 16GB RAM on MSI B450
  • Wifi and BT via BCM94360CD over PCIe (Windows compatible)
  • Sleep/wake works
  • Fixed iServices, even though I probably won't use them...
  • I consider my goals met.
  • Mapped USB ports, see below.

Known issues

  • Bluetooth is always "on", but not working. Probably USB Mapping; Resolved here.
  • Internal drives shown as externals (yellow-orange). Solved..
  • Black screen when setting resolution to 1080i instead of 1080p in system preferences. Minor issue.
  • Cannot boot into Recovery mode. Solved.
  • Won't sleep after set time (system prefs). "HibernateMode" set to "Auto" in config & port mapping KEXTs, see below.
  • Cannot adjust volume of built-in-monitor speaker (DisplayPort)~~~~. Solved with software.
  • Some Motherboard RGB issues - Solved by USB Mapping.
  • Choosing to boot into Windows via Bios (F11) - I don't consider this much of an issue.
I will try to solve these issues in separate threads and update this one, but any help much appreciated! Any comments - e.g. on Kexts; do I need them all?! - are welcome too...

Not tested yet

  • Microphone jack on case.
  • FileVault - don't need that, probably won't test

Advice for interested people


  • -- PLEASE BE ADISED THAT THERE ARE NEWER VERSIONS OF OPENCORE AND THAT THE PATH BELOW (ESPECIALLY THE CONFIG CHANGES) MIGHT NOT WORK WITH OC VERSIONS AFTER 0.5.5!! -- For a working EFI folder for OC 0.5.6 see in the comments.

My Hackintosh configuration

  • OpenCore 0.5.5
  • macOS Catalina 10.15.3
  • The following EFI is on my OpenCore stick. There is also the latest macOS on there. If you go for DualBoot, keep this stick around & updated as Windows seems to be able to mess around with your EFI... With this stick you'll always be able to boot your Hackintosh and repair its EFI partition.
  • FULL EFI FOLDER: See in comments ("PlatformInfo" has to be populated in config.plist - see below... You can copy over the info from your current config. Also, my changes in DeviceProperties/Add might be a problem for your storage setup.)
  • OpenCore EFI files:
  • Config.plist: http://www.filedropper.com/configreddit EDIT: See comments (only use if exactly same components as me; see below. Change according to OpenCore Guide!! [PlatformInfo removed; Populate this yourself like this!] I'd advice you to make your own config.plist.) Changed with ProperTree strictly according to the OpenCore Guide. Differences to sample.plist:
    • Probably outdated: All of the following modifications are for OC 0.5.5. If you are on a later version of OC it is likely that these have changed!
    • 5 initial Warnings removed.
    • DeviceProperties/Add: Removed "PciRoot(0x0)/Pci(0x1b,0x0)" and "PciRoot(0x0)/Pci(0x2,0x0)" as well as their children
      • Added Key "PciRoot(0x0)/Pci(0x1,0x1)/Pci(0x0,0x0)" as child of "Add" with Type "Directory". Added child beneath the just made child with name "built-in", type "Data" and value "01000000". To address drive issue above, see here.
    • Populated this config.plist with OC snapshot function of ProperTree (CMD/CTRL+R, point to EFI/OC/) . Adds KEXTs and SSDT.
    • Kernel/Emulate: Removed "CpuidMask" and "CpuidData" (were blank anyway).
    • Kernel/Patch: Ryzen/Threadripper(17h) Patch applied.
    • Kernel/Quirks:
      • "DummyPowerManagement" set to True
      • "ExternalDiskIcons" set to True
      • "PanicNoKextDump" set to True
      • "PowerTimeoutKernelPanic" set to True
      • "XhciPortLimit" set to True (set to False after USB mapping in step F)
    • Misc/Boot:
      • "HibernateMode" set "Auto" after USB mapping
    • Misc/Debug: Nothing changed.
    • Misc/Security:
      • "AllowNvramReset" set to True
      • "AllowSetDefault" set to True
      • "AuthRestart" left False
      • "RequireSignature" set to False
      • "RequireVault" set to False
      • "ScanPolicy" set to 0
    • Misc/Tools: Shell.efi added by the OC snapshot function.
    • NVRAM/7C436110-AB2A-4BBB-A880-FE41995C9F82:
      • "boot-args" set to "-v keepsyms=1 debug=0x100 agdpmod=pikera alcid=1"
      • "nvda_drv" set to <>
      • "prev-lang:kbd" set to my preferences. (Use "656E2D55 533A30" = HEX for keyboard layout "en-US:0"; find your own with a TEXT to HEX converter and this.
    • NVRAM/"WriteFlash" set to True,
    • PlatformInfo: Populated with info according to the Guide with GenSMBIOS. Went with a "iMacPro1,1". Found "Purchase Date not Validated" numbers after about 3 (x10) times.
    • UEFI/Drivers: Drivers auto-added by the OC snapshot function.
    • UEFI/Input:
      • "PointerSupport" changed to "Data" and set to <>
      • "PointerSupportMode" changed to "Data" and set to <>
    • UEFI/Protocols/"ConsoleControl" set to True
    • UEFI/Quirks:
      • "ProvideConsoleGop" set to True
      • "RequestBootVarFallback" set to True
  • Bios settings strictly according to the OpenCoreGuide:
    • Disabled:
      • "Fast Boot"
      • "CSM" [UEFI instead]
    • Enabled:
      • "EHCI/XHCI Hand-off"
      • "Above 4G decoding"

My process (only successful part)

(You'll need 3 USB sticks! 2 with at least 4GB, 1 with at least 8GB. I am not sure, whether the Linux Part is really necessary, or if the partitioning can also be done from the macOS or Win10 stick...)
A) The basic build
  1. Built PC.
  2. Installed Windows 10 from USB stick [8GB] (made from Microsoft Media Creation Tool, instructions here, don't forget to install in UEFI mode - see second link in 3.!). Did some fan adjustments in BIOS too... Keep that stick!
  3. Set up Windows 10, installed drivers (see here, here).
  4. Installed Python 3.7! (For SSDTTime, below. Don't get Python 3.8.1!)
Do not set up Windows too much yet, it will be deleted completely and reinstalled again.

B) Creating the OpenCore Stick
  1. Followed Snazzy Lab's Video (read its description!) to create the OpenCore stick, everything on the above Win10: (useful additional help: khronokernel and VanillaAMD and Github)
    1. (Maybe format your stick to GUID HFS+ via Linux or Mac first... See Github.)
    2. Downloaded latest macOS via gibMacOs.bat (Recovery package!) (Admin privileges needed!). Update 7zip first for step B)1.II. and B)1.III. and use a Lan connection!
    3. Made a bootable install of that via Makeinstall.bat (Number + o) (Admin privileges needed!).
    4. Opened the EFI folder on the now newly made USB stick.
    5. Deleted everything (3 files) in EFI/OC/Drivers/, except FwRuntimeServices.efi.
    6. Deleted everything (2 files) in EFI/OC/Tools/.
  2. Put in the following drivers from AppleSupportPkg on the stick to EFI/OC/Drivers/:
    1. ApfsDriverLoader.efi
    2. VBoxHfs.efi
  3. Put KEXT and SSDT and Drivers on the stick:
    1. For troubleshooting afterwards - while booting from the stick - consult: khronokernel/troubleshooting!!
    2. Put the above KEXTs on the stick, all in EFI/OC/Kexts (instructions: khronokernel, more kexts: onedrive).
    3. Put the following SSDTs on my stick (into OC/ACPI)
      1. See above! SSDTTime not needed.
    4. Created config.plist with ProperTree (search with crtl+f!) (full instructions: khronokernel plus config documentation mentioned above in B)3.a.!!):
      1. Renamed "simple.plist" in the downloaded OpenCorePkg folder to "config.plist" and copied it over to the stick into EFI/OC/.
      2. Open Propertree.bat (Admin privileges maybe needed!) and opened said config.plist via the menu bar "File" of proper tree.
      3. Created my own config via "OC snapshot" in the menu bar "File", navigated to EFI/OC of my stick.
      4. Patched my config with patches.plist from AMD_Vanilla (17h): Open simultaneously in ProperTree. (See Snazzy Laps Video and this on how!)
    5. Edited config.plist, followed Vanilla Guide/amd-config.plist (partly later because of errors): See above!
    6. Saved via menu bar "File".

C) Created bootable Linux stick and made partitions on my internal SSD for dual boot (I was recommended this procedure here), install macOS:
  1. Still in Windows 10: Followed the Ubuntu Tutorial to make another stick.
  2. Shut down Windows 10.
  3. Booted again, with the OpenCore Stick connected, temporarily changed the boot partition with F11 and chose my stick (some of the above mentioned config.plist changes were applied AFTER this step, because certain errors occured):
  4. Got to the boot picker and reset NVRAM.
  5. Restarted the same way and chose the macOS installer (Step 3).
  6. Went into the macOS installer's Disk Manager. Formatted the whole internal SSD (maybe ExFat? Probably doesn't matter) and made two partitions for macOS (APFS) and Windows (don't remember what, maybe ExFat?, doesn't matter)
  7. Exit the Disk Manager and enter the installer. Install macOS. Maybe create a backup of that.
  8. Do this: Especially the EFI copying! How to mount the EFI partition on macOS.
  9. Shut down.

E) Created Windows:
  1. Booted into Linux, via Stick.
  2. Got synaptic and hfsprogs for Linux:
    1. Searched the Programs for "Software & Updates". Enable second option: Community-maintained free and open-source software (universe). "Close" this window and let it do it's download.
    2. Opened Terminal (Ctrl+Alt+T), entered:
      1. sudo apt-get update
      2. sudo apt-get install synaptic
      3. sudo apt-get install hfsprogs (not needed anymore?!)
  3. Searched for "Disks". Designated the 200MB partition from above as EFI (I believe via the cog wheels > Format Partition). Close that window.
  4. Searched in progs for "GParted":
    1. Format the second, partition to NTFS.
    2. (You should see three partitions on your internal SSD: EFI, Mac (APFS - probably unrecognised) and Windows)
  5. Shut down Linux.
  6. Boot with Windows Stick connected into the Windows installer.
  7. Install Windows on that NTFS partition.
  8. (Mac and Windows will write their EFI on the same partition! Keep at least your OpenCore Stick!!)
F) Finished. Set up both machines (Windows: here and here) completely!! :D
  • Mapped my ports by removing the XHC0 controller with this kext completely (lost two ports in the process, but that's ok) and (optionally) mapped the PTXH controller with this kext (you might have to adjust this!). For why, see here. See here and here, too!
  • Disabled OpenCore logging: Values set to 0. (In config above not included!)
  • Found "valid" SMBIOS numbers, fixed iServices according to this. (In config above not included!)
  • Didn't enable FileVault or OpenCore Security Features yet... Probably won't.
submitted by CrayCJ to hackintosh [link] [comments]

MAME 0.216

MAME 0.216

With the end of November in sight, it’s time to check out MAME 0.216! We’ve addressed the reported issues with last month’s bgfx update, and made a whole lot of little improvements to MAME’s internal user interface. In particular, setting up controls should be easier, and several issues affecting macOS users with non-English number format settings have been fixed. Some of the issues caused bad settings to be written to INI files. If you still don’t see the filter list panel on the system selection menu, try removing the ui.ini file.
This month, we’re able to present two unreleased 1970s prototypes from Italian developer Model Racing: their internal code names are Cane and Orbite. With the assistance of former Model Racing employees, the source code was extracted from the original disks. These games are incomplete, but they provide a unique look into early CPU-based arcade development. Game & Watch titles continue to be emulated, with the addition of Mario The Juggler, and the panorama screen Mickey Mouse and Donkey Kong Circus games in this release.
This release brings GameKing emulation to MAME. The system-on-a-chip used in this low-cost, low-resolution hand-held console from the early 2000s has been identified and emulated. Games for the colour-screen GameKing III are also playable. Acorn BBC Micro emulation has been re-worked to support internal expansion boards, and a number of additional peripherals are now available. ZX Spectrum emulation has been enhanced with better open bus read behaviour and support for two Miles Gordon Technology peripherals.
Of course, these are just the highlights. You can get the source and Windows binary packages from the download page.

MAMETesters Bugs Fixed

New working machines

New working clones

Machines promoted to working

New machines marked as NOT_WORKING

New clones marked as NOT_WORKING

New working software list additions

Software list items promoted to working

New NOT_WORKING software list additions

Source Changes

submitted by cuavas to emulation [link] [comments]

MAME 0.214

MAME 0.214

With the end of September almost here, it’s time to see what goodies MAME 0.214 delivers. This month, we’ve got support for five more Nintendo Game & Watch titles (Fire, Flagman, Helmet, Judge and Vermin), four Chinese computers from the 1980s, and three Motorola CPU evaluation kits. Cassette support has been added or fixed for a number of systems, the Dragon Speech Synthesis module has been emulated, and the Dragon Sound Extension module has been fixed. Acorn Archimedes video, sound and joystick support has been greatly improved.
On the arcade side, remaining issues in Capcom CPS-3 video emulation have been resolved and CD images have been upgraded to CHD version 5, Sega versus cabinet billboard support has been added to relevant games, and long-standing issues with music tempo in Data East games have been worked around.
Of course, you can get the source and Windows binary packages from the download page.

MAMETesters Bugs Fixed

New working machines

New working clones

Machines promoted to working

Clones promoted to working

New machines marked as NOT_WORKING

New clones marked as NOT_WORKING

New working software list additions

Software list items promoted to working

New NOT_WORKING software list additions

Source Changes

submitted by cuavas to emulation [link] [comments]

How to make Dishonored Shine on PC - Redux

This game came out 7 years ago (wow) and around the time of release there was a great thread on how to make the game looks it's best on PC, sadly that thread is now buried, and two of the main contributors to it have deleted their accounts, posts, screenshots and guides. The steam threads are also dead as at some point steam changed their forum urls. Since I just redownloaded the game for my yearly play through I though I would attempt to remake the post with all the things I have learned.
I have made a small album here of screenshots here, however I am not the greatest screenshotter ever, and I didn't have too much time to make these. These are 5k shots, but I had to save them as PNG and compress them to go online, so they aren't quite as nice as the ones on my HDD. I hope they show just how clean the edges are and nice the SweetFX looks.
So to make Dishonored better we need to cover: I. Config files II. Anti Aliasing / Super sampling III. Anisotropic Filtering IV. Ambient Occlusion V. Sweetfx / shaders VI. Hud modification
I'll also add in some known issues and workarounds I've learned.
I. Config files
This is easy, as approximately a thousand years ago a user called Kakkoi made this modified ini file. It has better LOD, less pop in, and better shadows, etc. Delete everything from your current file and paste this in. Link
I'd recommend making this file read only as mine seemed to change itself back.
NOTE: this file is compatible with KoD and Brigmore Witches, however it does have a small issue. If you start either DLC the new hotbar icons (as in, the ones for powers and gadgets that were not in the base game - Stun Mine, etc.) on your shortcuts and radial wheel will be missing and replaced by a placeholder "img" icon. If you allow the config to be overwritten, this will fix itself however it also seems to undo the graphics improvements. The game is perfectly playable without the icons, and if you use no HUD and no radial menu, like I do, you won't even notice. Your call on whether you want the improvements or the icons.
II. Anti Aliasing
The anti aliasing in Dishonored is trash let's be honest, but there are multiple ways we can improve this. The overall best way is supersampling, which is extremely easy these days.
NOTE: this guide uses Nvidia's DSR, which is on the Nvidia control panel and not available to AMD users. I understand AMD has a feature that provides almost the exact same result, however I've never used it. You will have to look this up yourself however the same rules should apply.
DSR is an user friendly method of supersampling which is when you force the game to render in higher resolutions and then downsampling to your monitor resolution providing much better edges. If you are on 1080p, 4x downsampling will mean you are running the game at 4K. If you are on 1440p and you downsample 4x, you are running the game at 5K, which looks glorious.
To activate DSR, right click on your desktop and hit Nvidia Control Panel, go to "Manage 3D settings" and find the setting for DSR.
Generally people agree that DSR is only worthwhile if you use the 4x factor, with the smoothing bar at zero. This is because 4x gives you perfect pixel scaling, and the smoothness bar applies a horrible FXAA style blur to edges to try and clean them up. If you are worried about performance using 4x you can try a lower setting, however Dishonored is old and not very demanding, I have seen video benchmarks of 100+ FPS at 4k with a 1050ti.
NOTE: if you are running downsampling but also want high refresh rates (over 60hz), see the bottom of the anti aliasing section. The game defaults and locks itself to 60Hz when you use DSR but there is a workaround.
This is not the only Anti Aliasing method that can be used, you can also force AA using your graphics driver, and if you have a decent pc, you can combine both SSAA and AA. It is glorious. Again, this guide covers Nvidia Inspector. There is a AMD alternative, but you'll have to find your own guide to use it. The info in here should mostly apply.
Download Nvidia Inspector
It's a portable application so put it somewhere safe. Run it and hit this button In the top bar search Dishonored.
At the top, where you see Anti Aliasing Compatibility, copy and paste this flag: 0x080100C5 It should look like this.
*NOTE: * If you have used inspector before you may have seen other flags recommended, as there are a few that work with Dishonored. This one seems to be the least known but also the best, and it has the best quality of AA and doesn't do that weird thing some of the other flags do where it leaves a one pixel tall strip of white along the top of the screen.
Now, scroll down to the section called Anti Aliasing. "Under Anti Aliasing - Mode" click the drop down and choose "Override Application setting".
NOTE: Although we have chosen "Override application setting", for this AA flag to work, you must choose the MLAA Option in the Dishonored Graphics options.
Where it says AA Transparency Multisampling make sure it is enabled. The next two options:
Antialiasing mode Transparency AA mode
are up to you based on your required framerate and your specs. For me, I had zero problem running the game at 5k resolution, with 8x Multisampling and 8x SGSSAA. This is a little extreme however. 4x on both will be plenty. If you want to go lighter for more fps 2x on each will do. Test different options out and see what is best for you.
If your card allows the feature, make sure to enable to MFAA option too. I won't go into what it does, but it's a good thing. Once you have done all of this hit apply.
For the lazy, confused or curious this is what my settings look like.
DSR + high refresh rate bug
Now, if you want to use DSR but also want high refresh rates, you will have to use this small workaround. When launching the game and setting up high resolutions (4k+), the game changes its refresh rate to 60, regardless of what your monitor supports. It does not cap the framerate however, meaning if you are getting 130 fps on a 60Hz game you will get severe screen tearing. I don't know if this is a DX9 thing, or if the game just assumes (at the time of the game at least) 4k panels could only manage 60Hz, or some other reason. Anyway, there is a fix. Once your DSR is enabled, before starting the game, open the Nvidia Control Panel (not Inspector) and go to the section Change Desktop Resolution. [If you click the dropdown you should see your DSR resolution along with all the standard resolutions.] If you click this, you will now be downsampling everything your computer runs. It may look a little weird, and the dialog box asking you to confirm your changes may be tiny, but once we are in game it will look fine. If you load the game with your screen already running in 4/5k, for some reason the game is perfectly happy to now run at whatever refresh rate your monitor is, which is good for us G Sync users. It is a little annoying to do this every time you start the game, but for me it is worth it and it only takes a second. Just remember - when you choose your new resolution to hit yes to confirm your changes. Otherwise after 30 seconds it reverts to your native res.
TL;DR: for DSR + high refresh - downsample your desktop and then run the game at "native" res.
III. Anisotropic Filtering Anisotropic Filtering is a little simpler, in Nvidia Inspector, go to the Anisotropic Filtering section, and copy the following settings
*IV. Ambient Occlusion * Ambient Occlusion is much the same. This one impacted my framerate a little, so YMMV. Copy the following settings, and if it impacts your performance, either change "Quality" to a lower setting or turn it off. It doesn't affect the visuals too much.
V. SweetFx and Shader (optional step)
SweetFx is... A problem. At the time of writing their site has been down for a few weeks(?) making choosing a preset difficult. The Reshade site is still up, however most Reshade presets are also hosted on the SweetFx site. There is hope however, as using this archive of the Wayback Machine, to visit the Dishonored page and download presets, however the screenshots and previews aren't working so it's kind of a pot luck download. I personally use K-Putt'e's config, so I can vouch for that one being great, however they are all different and it's down to personal taste. Keep in mind this entire step is optional so if you don't want to be digging through the Wayback machine and downloading random configs you can't see screenshots of I wouldn't blame you. Keep in mind also you should always use the exact SweetFx version the preset was made for, making trying lots of different presets difficult (I don't think this is entirely true, but after a certain version old configs won't work with new SweetFx versions so it's best just to be safe, same with Reshade versions too) however you could always try making your own if you have the time and know how. That's not covered in this guide though.
So, after all that, assuming you do want to use a sweetfx, this is how to do it:
Choose the preset you want. As I said I really like K-putt's preset, it removes the washed out feel and makes certain colours pop while also darkening the tone very slightly. It removes that weird green wash the whole game seems to have and darkens dark areas perfectly but keeps the game very playable, (just grim enough.)
Download the required SweetFx version for your preset. Open the archive and extract the files into Dishonored\Binaries\Win32 (it's the folder that has the actual Dishonored.exe in it.)
DELETE the following files: dxgi.fx, dxgi.dll, SweetFX_settings.txt
Paste in the config you have downloaded, and rename it SweetFX_settings.txt, replacing the one was already in there. Alternatively you can open your config, copy all the text, and paste it into the existing settings.txt. Either way.
When you start the game, if installed correctly you should see a difference immediately when booting up. You can test this by turning it on and off. The default key to turn it on and off is scroll lock, I recommend going through various levels and areas and comparing on and off to see the difference. I can't play without this preset now, it's amazing.
VI. HUD
OK, last bit. As much as I love dishonored I hate the god damn hud, with all its spiky bits and jaggy edges. We can fix a lot of this though. From the User Interface Menu you can turn on or off pretty much anything in the game. Nice. However a few things will remain. The cogs in the bottom right when you save or autosave, the little hand symbol when you are able to pick up an object, and the black bars during cutscenes. We can set up a key to FULLY turn off the HUD, to get fully immersed.
Open:
Documents/My Games/Dishonored/DishonoredGame/Config/DishonoredInput.ini A few lines down you will see dozens of entries that start with "BaseBindings=" make a new line above these, with the following:
m_PCBindings=(Name="F6",Command="ShowHUD true")
We have now set up a hotkey that can completely turn the hud on or off. its set to F6 but you can make it anything you like. This is useful as if you want you can have the entire HUD turned on, and only pull it up when you need it, or like me you can use it to permanently have all aspects of the hud off. Good for screenshots too.
Note: There is one issue with this. Whenever you are going from one area to another, or Samuel is asking you if you are ready to leave a level, if the hud is off the clickable options will not show. You can simply press F6 to bring them back, and then click Leave Level and then switch the HUD off again.
Whew. We're done. I hope you found at least a part of this useful, some of this might be common knowledge but I wanted to get it all into one post. When you combine all of these tweaks I think Dishonored is twice as good looking. It is important to note that your mileage will definetly vary, however I think even with a weaker GPU it is worth trying a combination of all of these, as Dishonored is a very easy game to run so we might as well squeeze as much as we can out of it. With all these tweaks, 8x Multisampling and SGSSAA, downsampling from 5K I get between 80 - 130 fps (130 is the fps cap. I don't reccomend removing this cap as you can run into minor bugs such as leaning and then getting stuck leaning) For the record I have an Overclocked 1080ti, and an i7 8700k @ 5.0Ghz.
If you know of any other graphics tweaks please let me know, maybe I can add them in here.
Credit to Kakoii for the ini file Credit to K Putt'e for the SweetFX I mentioned
Thanks for reading
submitted by pheromonekvlt to dishonored [link] [comments]

MAME 0.216

MAME 0.216

With the end of November in sight, it’s time to check out MAME 0.216! We’ve addressed the reported issues with last month’s bgfx update, and made a whole lot of little improvements to MAME’s internal user interface. In particular, setting up controls should be easier, and several issues affecting macOS users with non-English number format settings have been fixed. Some of the issues caused bad settings to be written to INI files. If you still don’t see the filter list panel on the system selection menu, try removing the ui.ini file.
This month, we’re able to present two unreleased 1970s prototypes from Italian developer Model Racing: their internal code names are Cane and Orbite. With the assistance of former Model Racing employees, the source code was extracted from the original disks. These games are incomplete, but they provide a unique look into early CPU-based arcade development. Game & Watch titles continue to be emulated, with the addition of Mario The Juggler, and the panorama screen Mickey Mouse and Donkey Kong Circus games in this release.
This release brings GameKing emulation to MAME. The system-on-a-chip used in this low-cost, low-resolution hand-held console from the early 2000s has been identified and emulated. Games for the colour-screen GameKing III are also playable. Acorn BBC Micro emulation has been re-worked to support internal expansion boards, and a number of additional peripherals are now available. ZX Spectrum emulation has been enhanced with better open bus read behaviour and support for two Miles Gordon Technology peripherals.
Of course, these are just the highlights. You can get the source and Windows binary packages from the download page.

MAMETesters Bugs Fixed

New working machines

New working clones

Machines promoted to working

New machines marked as NOT_WORKING

New clones marked as NOT_WORKING

New working software list additions

Software list items promoted to working

New NOT_WORKING software list additions

Source Changes

submitted by cuavas to MAME [link] [comments]

Free binary bot free binary com bot 2020 free download binary bot Binary Matrix Pro Free Binary Options Signals Trial ♦Best Hack♦Lumber Tycoon 2☻New Script♦AutoFarm♦TP♦Dupe And MORE☻ Go With Green Binary Options Trading System 2014 Golden boom go with green binary options download movies

One thing you forgot to mention in the article, which i discovered when trying to add games tomy collection, specifically PS1 games, is that for the playstation 1 games to show, they must have a .cue file, otherwise they wont scan. that doesnt mean you cant play them, it just means you have to go and search the folder where the game is and The Binary Game Instructions: If you see a binary number, enter the decimal value in the green box. If you see a decimal number on the right, click the bits to make the binary number match. Try it! This game is an adaptation of the Binary Game from Cisco Systems Page Visits: Cisco's Binary Number game has been brought back with our adaptation. Learn how to convert binary to decimal and vice versa with this fast-paced 'Easy to learn, hard to master' game about binary numbers For each binary option trade signal, you will receive a live alert for a binary option trade of a 5 or 15-minute duration. A green arrow means the price is expected to go up (buy a "call"), while a red arrow means the price is expected to go down (buy a "put"). Binary option trading on margin involves high risk, and is not suitable for all investors. As a leveraged product losses are able to exceed initial deposits and capital is at risk. Before deciding to trade binary options or any other financial instrument you should carefully consider your investment objectives, level of experience, and risk

[index] [16677] [17528] [26260] [16348] [14929] [27458] [28994] [11778] [13010] [4372]

Free binary bot free binary com bot 2020 free download binary bot

Binary Matrix Pro specifically is targeted on one minute or 60 second binary options trades. Therefore, it's perfect for those who plan to make money with trading. It's really a good investment ... Green hell download 2020 green hell survival game It sounds like I'm supposed to write changelog here, but instead I'll just use it to explain the new contents and tips for the recent update. undefined golden boom binary options xposed press release, golden boom binary option investor, goldenboom best binary option platform 2017. golden boom go with green binary options download movies ... Download hack: https://clink.fun/HackCheet HOW TO USE: 1 - Download file, drop it on your desktop and run 2- Open the file 3 - Wait and Enjoy! Play carefully, otherwise ... Go With Green 2014 - Binary Options Trading System: Download now at http://goo.gl/qbhjzs Go With Green Is The New Revolutionary System For Trading Binary Opt...

Flag Counter