Butterfly Labs ship first Bitforce SC 60 bitcoin miner

[SG] ButterFly Labs BitForce 10 GH/s MODEL BF0005G Bitcoin Miner

The Miner is in good working condition. Includes the ButterFly Labs Bitcoin miner, USB cable to connect to the computer and a power adapter. This Miner has been quietly mining away at 10.58GH/s since December 2013 with no problems. I have been using Butterfly Labs EasyMiner. Please message me if you are interested.
submitted by halocyn to dogemarket [link] [comments]

Butterfly Labs Bitcoin Miner - 10 GH/s Processor, USB 2.0 - BF0010G: Other Electronics : Walmart.com

Butterfly Labs Bitcoin Miner - 10 GH/s Processor, USB 2.0 - BF0010G: Other Electronics : Walmart.com submitted by bVector to NSL [link] [comments]

Decred Journal – September 2018

Note: you can read this on GitHub (link), Medium (link) or old Reddit (link).

Development

Final version 1.3.0 of the core software was released bringing all the enhancements reported last month to the rest of the community. The groundwork for SPV (simplified payment verification) is complete, another reduction of fees is being deployed, and performance stepped up once again with a 50% reduction in startup time, 20% increased sync speed and more than 3x faster peer delivery of block headers (a key update for SPV). Decrediton's integrations of SPV and Politeia are open for testing by experienced users. Read the full release notes and get the downloads on GitHub. As always, don't forget to verify signatures.
dcrd: completed several steps towards multipeer downloads, improved introduction to the software in the main README, continued porting cleanups and refactoring from upstream btcd.
Currently in review are initial release of smart fee estimator and a change to UTXO set semantics. The latter is a large and important change that provides simpler handling, and resolves various issues with the previous approach. A lot of testing and careful review is needed so help is welcome.
Educational series for new Decred developers by @matheusd added two episodes: 02 Simnet Setup shows how to automate simnet management with tmux and 03 Miner Reward Invalidation explains block validity rules.
Finally, a pull request template with a list of checks was added to help guide the contributors to dcrd.
dcrwallet: bugfixes and RPC improvements to support desktop and mobile wallets.
Developers are welcome to comment on this idea to derive stakepool keys from the HD wallet seed. This would eliminate the need to backup and restore redeem scripts, thus greatly improving wallet UX. (missed in July issue)
Decrediton: bugfixes, refactoring to make the sync process more robust, new loading animations, design polishing.
Politeia: multiple improvements to the CLI client (security conscious users with more funds at risk might prefer CLI) and security hardening. A feature to deprecate or timeout proposals was identified as necessary for initial release and the work started. A privacy enhancement to not leak metadata of ticket holders was merged.
Android: update from @collins: "Second test release for dcrandroid is out. Major bugs have been fixed since last test. Latest code from SPV sync has been integrated. Once again, bug reports are welcome and issues can be opened on GitHub". Ask in #dev room for the APK to join testing.
A new security page was added that allows one to validate addresses and to sign/verify messages, similar to Decrediton's Security Center. Work on translations is beginning.
Overall the app is quite stable and accepting more testers. Next milestone is getting the test app on the app store.
iOS: the app started accepting testers last week. @macsleven: "the test version of Decred Wallet for iOS is available, we have a link for installing the app but the builds currently require your UDID. Contact either @macsleven or @raedah with your UDID if you would like to help test.".
Nearest goal is to make the app crash free.
Both mobile apps received new design themes.
dcrdata: v3.0 was released for mainnet! Highlights: charts, "merged debits" view, agendas page, Insight API support, side chain tracking, Go 1.11 support with module builds, numerous backend improvements. Full release notes here. This release featured 9 contributors and development lead @chappjc noted: "This collaboration with @raedahgroup on our own block explorer and web API for @decredproject has been super productive.".
Up next is supporting dynamic page widths site wide and deploying new visual blocks home page.
Trezor: proof of concept implementation for Trezor Model T firmware is in the works (previous work was for Model One).
Ticket splitting: updated to use Go modules and added simnet support, several fixes.
docs: beginner's guide overhaul, multiple fixes and cleanups.
decred.org: added 3rd party wallets, removed inactive PoW pools and removed web wallet.
@Richard-Red is building a curated list of Decred-related GitHub repositories.
Welcome to new people contributing for the first time: @klebe, @s_ben, @victorguedes, and PrimeDominus!
Dev activity stats for September: 219 active PRs, 197 commits, 28.7k added and 18.8k deleted lines spread across 6 repositories. Contributions came from 4-10 developers per repository. (chart)

Network

Hashrate: started and ended the month around 75 PH/s, hitting a low of 60.5 and a new high of 110 PH/s. BeePool is again the leader with their share varying between 23-54%, followed by F2Pool 13-30%, Coinmine 4-6% and Luxor 3-5%. As in previous months, there were multiple spikes of unidentified hashrate.
Staking: 30-day average ticket price is 98 DCR (+2.4). The price varied between 95.7 and 101.9 DCR. Locked DCR amount was 3.86-3.96 million DCR, or 45.7-46.5% of the supply.
Nodes: there are 201 public listening nodes and 325 normal nodes per dcred.eu. Version distribution: 5% are v1.4.0(pre) dev builds (+3%), 30% on v1.3.0 (+25%), 42% on v1.2.0 (-20%), 15% on v1.1.2 (-7%), 6% on v1.1.0. More than 76% of nodes run v1.2.0 and higher and therefore support client filters. Data as of Oct 1.

ASICs

Obelisk posted two updates on their mailing list. 70% of Batch 1 units are shipped, an extensive user guide is available, Obelisk Scanner application was released that allows one to automatically update firmware. First firmware update was released and bumped SC1 hashrate by 10-20%, added new pools and fixed multiple bugs. Next update will focus on DCR1. It is worth a special mention that the firmware source code is now open! Let us hope more manufacturers will follow this example.
A few details about Whatsminer surfaced this month. The manufacturer is MicroBT, also known as Bitwei and commonly misspelled as Bitewei. Pangolinminer is a reseller, and the model name is Whatsminer D1.
Bitmain has finally entered Decred ASIC space with their Antminer DR3. Hash rate is 7.8 TH/s while pulling 1410 W, at the price of $673. These specs mean it has the best GH/W and GH/USD of currently sold miners until the Whatsminer or others come out, although its GH/USD of 11.6 already competes with Whatsminer's 10.5. Discussed on Reddit and bitcointalk, unboxing video here.

Integrations

Meet our 17th voting service provider: decredvoting.com. It is operated by @david, has 2% fee and supports ticket splitting. Reddit thread is here.
For a historical note, the first VSP to support ticket splitting was decredbrasil.com:
@matheusd started tests on testnet several months ago. I contacted him so we could integrate with the pool in June this year. We set up the machine in July and bought the first split ticket on mainnet, using the decredbrasil pool, on July 19. It was voted on July 30. After this first vote on mainnet, we opened the tests to selected users (with more technical background) on the pool. In August we opened the tests to everyone, and would call people who want to join to the #ticket_splitting channel, or to our own Slack (in Portuguese, so mostly Brazilian users). We have 28 split tickets already voted, and 16 are live. So little more than 40 split tickets total were bought on decredbrasil pool. (@girino in #pos-voting)
KuCoin exchange listed DCBTC and DCETH pairs. To celebrate their anniversary they had a 99% trading fees discount on DCR pairs for 2 weeks.
Three more wallets integrated Decred in September:
ChangeNow announced Decred addition to their Android app that allows accountless swaps between 150+ assets.
Coinbase launched informational asset pages for top 50 coins by market cap, including Decred. First the pages started showing in the Coinbase app for a small group of testers, and later the web price dashboard went live.

Adoption

The birth of a Brazilian girl was registered on the Decred blockchain using OriginalMy, a blockchain proof of authenticity services provider. Read the full story in Portuguese and in English.

Marketing

Advertising report for September is ready. Next month the graphics for all the ads will be changing.
Marketing might seem quiet right now, but a ton is actually going on behind the scenes to put the right foundation in place for the future. Discovery data are being analyzed to generate a positioning strategy, as well as a messaging hierarchy that can guide how to talk about Decred. This will all be agreed upon via consensus of the community in the work channels, and materials will be distributed.
Next, work is being done to identify the right PR partner to help with media relations, media training, and coordination at events. While all of this is coming up to speed, we believe the website needs a refresher reflecting the soon to be agreed upon messaging, plus a more intuitive architecture to make it easier to navigate. (@Dustorf)

Events

Attended:
Upcoming:
We'll begin shortly reviewing conferences and events planned for the first half of 2019. Highlights are sure to include The North American Bitcoin Conference in Miami (Jan 16-18) and Consensus in NYC (May 14-16). If you have suggestions of events or conferences Decred should attend, please share them in #event_planning. In 2019, we would like to expand our presence in Europe, Asia, and South America, and we're looking for community members to help identify and staff those events. (@Dustorf)

Media

August issue of Decred Journal was translated to Russian. Many thanks to @DZ!
Rency cryptocurrency ratings published a report on Decred and incorporated a lot of feedback from the community on Reddit.
September issue of Chinese CCID ratings was published (snapshot), Decred is still at the bottom.
Videos:
Featured articles:
Articles:

Community Discussions

Community stats:
Comm systems news: Several work channels were migrated to Matrix, #writers_room is finally bridged.
Highlights:
Twitter: why decentralized governance and funding are necessary for network survival and the power of controlling the narrative; learning about governance more broadly by watching its evolution in cryptocurrency space, importance of community consensus and communications infrastructure.
Reddit: yet another strong pitch by @solar; question about buyer protections; dcrtime internals; a proposal to sponsor hoodies in the University of Cape Town; Lightning Network support for altcoins.
Chats: skills to operate a stakepool; voting details: 2 of 3 votes can approve a block, what votes really approve are regular tx, etc; scriptless script atomic swaps using Schnorr adaptor signatures; dev dashboard, choosing work, people do best when working on what interests them most; opportunities for governments and enterprise for anchoring legal data to blockchain; terminology: DAO vs DAE; human-friendly payments, sharing xpub vs payment protocols; funding btcsuite development; Politeia vote types: approval vote, sentiment vote and a defund vote, also linking proposals and financial statements; algo trading and programming languages (yes, on #trading!); alternative implementation, C/C++/Go/Rust; HFTs, algo trading, fake volume and slippage; offline wallets, usb/write-only media/optical scanners vs auditing traffic between dcrd and dcrwallet; Proof of Activity did not inspire Decred but spurred Decred to get moving, Wikipedia page hurdles; how stakeholders could veto blocks; how many votes are needed to approve a proposal; why Decrediton uses Electron; CVE-2018-17144 and over-dependence on single Bitcoin implementation, btcsuite, fuzz testing; tracking proposal progress after voting and funding; why the wallet does not store the seed at all; power connectors, electricity, wiring and fire safety; reasonable spendings from project fund; ways to measure sync progress better than block height; using Politeia without email address; concurrency in Go, locks vs channels.
#support is not often mentioned, but it must be noted that every day on this channel people get high quality support. (@bee: To my surprise, even those poor souls running Windows 10. My greatest respect to the support team!)

Markets

In September DCR was trading in the range of USD 34-45 / BTC 0.0054-0.0063. On Sep 6, DCR revisited the bottom of USD 34 / BTC 0.0054 when BTC quickly dropped from USD 7,300 to 6,400. On Sep 14, a small price rise coincided with both the start of KuCoin trading and hashrate spike to 104 PH/s. Looking at coinmarketcap charts, the trading volume is a bit lower than in July and August.
As of Oct 4, Decred is #18 by the number of daily transactions with 3,200 tx, and #9 by the USD value of daily issuance with $230k. (source: onchainfx)
Interesting observation by @ImacallyouJawdy: while we sit at 2018 price lows the amount locked in tickets is testing 2018 high.

Relevant External

ASIC for Lyra2REv2 was spotted on the web. Vertcoin team is preparing a new PoW algorithm. This would be the 3rd fork after two previous forks to change the algorithm in 2014 and 2015.
A report titled The Positive Externalities of Bitcoin Mining discusses the benefits of PoW mining that are often overlooked by the critics of its energy use.
A Brief Study of Cryptonetwork Forks by Alex Evans of Placeholder studies the behavior of users, developers and miners after the fork, and makes the cases that it is hard for child chains to attract users and developers from their parent chains.
New research on private atomic swaps: the paper "Anonymous Atomic Swaps Using Homomorphic Hashing" attempts to break the public link between two transactions. (bitcointalk, decred)
On Sep 18 Poloniex announced delisting of 8 more assets. That day they took a 12-80% dive showing their dependence on this one exchange.
Circle introduced USDC markets on Poloniex: "USDC is a fully collateralized US dollar stablecoin using the ERC-20 standard that provides detailed financial and operational transparency, operates within the regulated framework of US money transmission laws, and is reinforced by established banking partners and auditors.".
Coinbase announced new asset listing process and is accepting submissions on their listing portal. (decred)
The New York State Office of the Attorney General posted a study of 13 exchanges that contains many insights.
A critical vulnerability was discovered and fixed in Bitcoin Core. Few days later a full disclosure was posted revealing the severity of the bug. In a bitcointalk thread btcd was called 'amateur' despite not being vulnerable, and some Core developers voiced their concerns about multiple implementations. The Bitcoin Unlimited developer who found the bug shared his perspective in a blog post. Decred's vision so far is that more full node implementations is a strength, just like for any Internet protocol.

About This Issue

This is the 6th issue of Decred Journal. It is mirrored on GitHub, Medium and Reddit. Past issues are available here.
Most information from third parties is relayed directly from source after a minimal sanity check. The authors of Decred Journal have no ability to verify all claims. Please beware of scams and do your own research.
Feedback is appreciated: please comment on Reddit, GitHub or #writers_room on Matrix or Slack.
Contributions are also welcome: some areas are adding content, pre-release review or translations to other languages.
Credits (Slack names, alphabetical order): bee, Dustorf, jz, Haon, oregonisaac, raedah and Richard-Red.
submitted by jet_user to decred [link] [comments]

Minted our first bitcoin this morning! Took about 18 hours (Butterfly Labs Mini Rig SC 500 GH/s)

http://i.imgur.com/LvDPIjY.png
We're using the Butterfly Labs 500 GH/s Mini Rig.
Might as well do a small review -- the hardware itself is temperamental. For example, ours showed up with the unresponsive Nexus tablet on the front panel. Dealing with Butterfly is a total shit sandwich given the rip-and-run state of the overall business, so I had to figure out how to bypass the internal routing and have a laptop be the brains of the operation.
After a couple of days of messing with usb drivers, which refused to stand up on Windows 7, I finally got the laptop to recognize all 8 modules. However, I could not start mining due to an error starting the bfg miner task from the inside of their Easy Miner application. I tried to force bfg via the command line, and it finally worked, although the hash rate was atrocious.
Another day or so, and I had the rig mining. The hardware recognition issue was due to me not giving the laptop enough time to kick ALL modules on. It takes a good 2-3 minutes for all usb notifications to stop bleep-blooping. The hash rate was in the 470 GH/s area, which was perfect, but then the modules started to shut themselves off due to overheating at 83 C. The log would show how the unit was taking down hot modules and then kicking them back on non-stop. The ambient temp in the room is around 75. I played with positioning, fan speeds, to no avail. The hash rate at that point dropped into the 400s, and my 15 amp circuit breakers started to get tripped. This went on for a little, and then I permanently blew one of them and had to pick some up at the Home Depot. But hey, it only took a single trip :)
So then I got a 5200 BTU A/C unit, mounted it in the window, and positioned the rig in front of it. That seemed to fix the breaker-tripping and overheating issues. It runs at low 70s C during the day and low 60s C at night. I am now making custom funnels out of thermal foam board to vent exhaust heat outside and also connect the 11" AC opening to the 16"x16" intake area of the rig (looks something like this). The unit generates a lot of heat, no joke. I bet when the weather gets colder, it can serve as a furnace for this side of the house. If you're wondering why I'm talking about it still not being cold outside in November, I'm in Texas. It's really beautiful right now, high of 75 and sunny.
Also, the noise ... how could I forget about the noise. It sounds like a server room. There's 18 fans, plus PSU fans, and they are quite loud. Don't expect to inconspicuously set this rig in the corner of your living room.
It's been on for over 24 hours now, uninterrupted. To the moon!
Timestamp,Core Temp,AC ON/OFF,Total Mined (BTC)
11/1/2013 12:00 PM,80 C,OFF,0.00
11/3/2013 3:30 PM,73 C,OFF,1.78
11/4/2013 2:05 PM,75 C,ON,2.28
11/5/2013 11:00 AM,75 C,ON,2.74
11/6/2013 5:00 PM,70 C,OFF,3.18
11/7/2013 12:00 PM,79 C,OFF,3.53
11/8/2013 5:00 PM,70 C,OFF,4.03
11/13/2013 11:00 PM,68 C,OFF,6.01
11/18/2013 5:00 PM,78 C,OFF,7.69
11/23/2013 11:00 AM,66 C,OFF,9.21
11/26/2013 8:00 PM, 62 C,OFF,10.41
submitted by ironmine to Bitcoin [link] [comments]

ebay.. pay with Bitcoin?.. scam? help

Alright.. now that your here maybe you can help.. so I am looking into maybe buying a minning rig off ebay but but the seller asks to pay through Bitcoin but also make a deposit with paypal.. but the item may not ship for a month or three.. my question is if i send Bitcoins to said wallet.. before the item ships whats stopping him from running off with my money if its all anonymous.. there would be no trace back to him if the item never showed and no regulation from my understanding.. is there something im missing... this would be the link but ive noticed others.. http://www.ebay.com/itm/BitForce-Mini-Rig-SC-1-500-GH-s-BitCoin-Miner-Butterfly-Labs-ONLY-176-10-BTC-/261199252235?pt=LH_DefaultDomain_0&hash=item3cd0b04b0b
submitted by This_is_why_Im_not to Bitcoin [link] [comments]

[WTS] BFL 10.1 GHs Jalapeño & 60 GHs Singles Bitcoin Miners

Recently upgraded BFL Jalapeño to 10.1 GHs. ($600) Also have 4x BFL 60GHs Singles for sale as well. ($1800)
www.NTXbitcoin.com
submitted by jat0369 to BitMarket [link] [comments]

[WTS] 30GH/S Butterfly Labs Miner

1.5 BTC Will Ship. Almost new condition.
The unit is in hand, tested, and in perfect working condition.
1.5 BTC for the 30gh/s They will be shipped the day payment has cleared.
Included: 1 X 30 GH/s Butterfly Labs Little Single Miner 2 x Butterfly Labs Power Supply 2 x Power Cord 2 x USB Cable
These are plug and play devices! Everything from Butterfly Labs is included to get started mining Bitcoin.
Dimensions of box: 12" x 12" x 6" high Shipping in original packages. Shipping to US, Canada. International. Customs and/or duty charges may apply.
Lifetime warranty provided by Butterfly Labs on the board from manufacture defect or component failure.
Processing Power: Single: 30 Gh/s (+/- 10% running variance)
submitted by cdnmagikz to BitMarket [link] [comments]

Bit.Asic - finally received our first Bitcoin Asic Mining Rig from Butterfly Labs

https://bitfunder.com/asset/BIT.ASIC
We are happy to announce that we have finally received our first Bitcoin Asic Mining Rig from Butterfly Labs.
Butterfly Labs Orders: check out the images tab for screen shots and pictures of hardware we have received that are currently in production.
Order # 100049260, pay-dated 4/2/2013, for 1 Butterfly Labs (30 GH/s Bitcoin Miner) (Purchased and Confirmed)
Order # 100031677, pay-dated 4/2/2013, for 1 Butterfly Labs (30 GH/s Bitcoin Miner) (Purchased and Confirmed)
Order # 100067004, pay-dated 6/16/2013, for 1 Butterfly Labs (50 GH/s Bitcoin Miner with 10 GH/s upgrade totaling 60 GH/s) (Purchased and Confirmed)
Order # 100069703, pay-dated 7/1/2013, for 1 Butterfly Labs (50 GH/s Bitcoin Miner with 10 GH/s upgrade totaling 60 GH/s) (Purchased and Confirmed)
KnCMiner Orders:
Order #3246, pay-dated 7/3/2013, for 1 KnCMiner (100 GH/s Mercury Bitcoin Miner) (Purchased and Confirmed)
NEWEST Order #4345, pay-dated 7/23/2013, for 1 KnCMiner (400 GH/s Jupiter Bitcoin Miner) (Purchased and Confirmed)
** Total Hashing Power: 5.5GH/s - Actively Mining
*** Dividends: will be paid every Sunday
About the Issuer:
We are a team of IT professionals & business owners with expertise in the fields of server hardware / infrastructure and web engineering.
Alongside our ongoing mining activities, we recently launched Bit.co.in which offers the crypto-currency community a free address shortener. This is a launch pad for many ideas we have for the developing community.
We are actively involved in the forums.
Bitcoin Talk user profile: coinminers
Butterfly Labs user profile: bit.co.in
Feel free to contact us at:
Email: [email protected]
Facebook: https://www.facebook.com/bitcoinshortener
submitted by nimanator to Bitcoin [link] [comments]

Eobot.com FAQ

FAQ https://www.eobot.com/new.aspx?referid=94984
General Questions What is a Bitcoin? Good question; see www.bitcoin.org for more information.
What are your options to withdraw? We currently only allow withdrawals in BTC/LTC/BC/NMC/DOGE/XRP/DRK/RDD/BTS/CURE/PPC/NXT/SYS.
Why can't I deposit or withdraw "real currency", aka fiat (USD/EUJPY/GBP/CNY/RUB/etc.)? Due to international law, we do not allow you to deposit or withdraw fiat currencies. In the USA, there are MSB and FinCen regulations; in Europe, certain countries have banned cryptocurrencies, and in China, the banks aren't allowed to transfer cryptocurrencies. The laws may change in the future.
Why does my "Total Cryptocurrency Value" go down? This is because that display is tied to the exchange rates on other websites. Also see this user generated YouTube video for more information: https://www.youtube.com/watch?v=GucqlMuIXMg
Are their any fees to join or monthly fees? No fees.
Do you speak Spanish/Russian/Chinese? No, only English, but Google Translator works well.
What are the maximums/minimums for withdrawing? There are no maximums. The minimums are small, see the withdraw page for details.
Where can I see the terms and conditions? Please click here for terms and conditions.
Where can I see the privacy policy? Please click here for privacy policy.
Are you hiring? We are always looking for quality talent. If you would like to contribute, then please send your cover letter and resume to [email protected].
Do you have a bug bounty program? Yes, we pay for bugs, so contact us for details or visit us at CrowdCurity.com and submit bugs there!
Do you perform off-chain transactions? No we do not. All cryptocurrencies are sent, usually including miner fees, and can be seen on the blockchain for that respective cryptocurrency. This helps secure the network, makes our transactions transparent, provides an easier way to debug and track down coins, and reduces the chance for fraud. An off-chain transaction would be like what Coinbase could do if both users are Coinbase users and they change coins from one email to another, mark it in the database, and Bitcoin is never actually sent from one wallet to another.
Why does my balance reset after refreshing the page or changing cryptocurrencies? The server updates every 60 seconds and the balances you see updating in real-time are performed with Javascript. If you change pages quickly, or choose a new cryptocurrency, then it will look like it is resetting. However nothign is lost, as whatever cryptocurrency it is set at when the server updates will get the past 60 seconds of mining results.
Help! My account was hacked and withdraws are being made? Eobot is a secure site and has never been compromised. If your account was hacked, then you should change your password, turn on 2FA, and turn on email notifications. There are many unscrupulous Bitcoin sites, and most likely, you used the same password on another site. Never re-use passwords!
Do you have any wallpapers? Yes, you can download wallpaper1 or wallpaper2. Feel free to send us your own creations.
What does Eobot stand for? We have heard everything, let us know your favorite, including: Earn Online Bot, Earn Online Bitcoins Online Tool, Earn Online By Our Tech.
Is this legal? We cannot provide legal advice; make sure cryptocurrencies are legal in your jurisdiction before continuing to use Eobot.
Cloud Mining Questions What are the Cloud Mining fees? For electricity and maintenance, we currently charge a fee of 65% for SHA-256 and 65% for Scrypt. These values will change as difficulty increases, exchange rates change, and newer ASICs come online. These fees are better than our competitors, for instance CEX.IO charges $0.105 per GHS, which is a 81% fee! While GAW charges a 96% fee at current prices!
How long are the Cloud Mining rentals and contracts? Prior to October 11 2014, GHS/KHS contracts had no expiration. Old contracts are not affected. New contracts and rentals, mined or purchased after October 11 2014, are now limited in term for 5 years going forward. See your History tab for expiration dates.
Can I sell my Cloud Mining? No, you cannot sell the cloud shares at this time. This is because we own the hardware and do not want to be stuck if everyone decides to sell at once.
Can I buy Cloud Mining with credit card/USD? Yes, but please keep in mind you cannot sell or convert the Cloud Mining.
Can I buy Cloud Mining with cryptocurrency? Yes, deposit the cryptocurrency and then convert it to your choice of Cloud Mining.
What are the maximums/minimums when making a credit card purchase to buy Cloud Mining? The minimum is 1.0 GHS and 10.0 KHS and there is no maximum at this time.
Can I buy a Cloud Mining that mines in Scrypt? You can use the Cloud Mining SHA-256 hashing power to mine other currencies by automatically converting them as you mine, but the earnings will still be tied to SHA-256/Bitcoin difficulty, not Scrypt/Litecoin difficulty.
What is the difference between Cloud Mining SHA-256 and Cloud Mining Scrypt? One is tied to the difficulty in mining SHA-256 cryptocurrency (Bitcoin) and the other is tied to the difficulty in mining Scrypt cryptocurrency (Litecoin). This means that if history is any indication of the future, then the Cloud Mining Scrypt won't decrease as fast as the Cloud Mining SHA-256.
What does 1 instance of Cloud Mining SHA-256 and Cloud Mining Scrypt equal? 1 of Cloud SHA-256 equates to 1.0 GHS of SHA-256 mining power, while 1 of Cloud Scrypt equates to 1 KHS of Scrypt mining power.
Can I change the pool that my Cloud mines on? No, you cannot; this may change in the future.
What hardware is behind the Cloud Mining? The hardware varies from custom ASICs to GPUs. The ASICs are behind the SHA-256 and the GPUs are behind the Scrypt.
Can I RDP (remote desktop) into my Cloud Mining? No, you cannot at this time; we will run the servers for you.
What is the Cloud Mining Pre-Order? These are the same as the other Cloud Mining, but they will start mining on a later date. For instance, a Cloud Mining Pre-Order October 2014 will start mining on October 1, 2014.
Software/Miner Questions Why is it stuck on "initializing...please wait 5 minutes"? We recently changed our Scrypt pool, so this messge will show and the stats and speed won't show under your account. See pool info page for more info.
Why does it show as a trojan/virus? This is a false-positive that many of the popular antivirus programs report. For now you can ignore it, or try another free antivirus, like Microsoft Security Essentials. Hackers use something similar programs to make money off of people's computers, so that is why it shows up as a virus.
Why does Chrome block the download as malicious? This is another false-positive. Simply, go to your Chrome settings, scroll to the bottom and click on "Show Advanced Settings". Go to the Privacy section and uncheck "Enable phishing and malware protection". You will only do this temporarily. Then proceed to download our software. Then return to your privacy settings and recheck Enable Phishing to further protect you.
Do you have a Mac or Linux version? Yes, see the Pool Info under the Account page.
How do I use cgminer? See this English PDF tutorial for cgminer, or Spanish version, created by one of our members, for a simple walk-through.
How can I increase the speed? Important to increase speed: The default cgminer settings do not include hardware specific flags, which you may find here in the Litecoin Mining Hardware Comparison. Failing to use the proper flags can result in performance decreases in excess of 50%.
What do the intensity settings relate to? This is the same as cgminer flag --intensity. Low is 11, normal is none, high is 15, very high is 17, extreme is 19.
Can I use one account for multiple computers on same IP address? Yes, it will add your speed/rates together, you can use as many computers as you want.
Can I connect to the pool manually, through cgminer or bfgminer? Yes, see the Pool Info under the Account page.
Do you use Bitcoin and Litecoin? Yes, we are the easiest miner to use with BTC and LTC and convert on the backend automatically.
What do you use on the backend? We use cgminer, bfgminer, pooler's CPU miner, and a variety of pools.
Can I mine any cryptocurrency? Yes, regardless if you use SHA-256 or Scrypt (BTC vs LTC mode), you can earn and mine any cryptocurrency.
Can I use an ASIC? Yes, simply choose the option and run as GPU mode. Devices that work with bfgminer will work, for instance USB Block Eruptors or Butterfly Labs ASICs. You can also contact us for pool information for other ASICs.
What is the best graphics card/computer to buy? Either use a high end ATI Radeon card, or buy one of the USB Block Eruptor devices on Ebay/Amazon or a similar online store.
What drivers do I need for USB mode? http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx
Why doesn't GPU mode work? You may need to download the OpenCL drivers; get them from here: http://developer.nvidia.com/opencl
Where can I get the .NET framework? Try Windows Update, or use Microsoft Web Platform Installer.
Can I use a proxy server? Yes, edit intensity.txt and put the details in there, for example, add "--proxy=http://mycompany-http-proxy:8080"
Where can I download the software? Download from link here
Can I use custom flags/change intensity? Yes, you can put in whatever custom flags/parameters/arguments you want. Edit the "resources/intensity.txt" file. Put in whatever you want, like for GPU mode: "--intensity 12 --shaders 1024" or for CPU mode (number of threads): "-t 32"
submitted by KryptosBit to Bitcoin [link] [comments]

Butterfly Labs 5 GH/s ASIC Bitcoin mining rig, the Jalapeno How to setup a 60 GH/s Butterfly Labs BFL Single SC ASIC Miner ButterflyLabs - YouTube

Amazon.in: Buy Asic Bitcoin Miner - Butterfly Labs Jalapeño online at low price in India on Amazon.in. Check out Asic Bitcoin Miner - Butterfly Labs Jalapeño reviews, ratings, features, specifications and more at Amazon.in Butterfly Labs has shipped its first Bitfofce SC 60 bitcoin miner, as reports a Butterfly Labs forum user. of which only one dropped slightly below the 60 GH/s threshold to 58 GH/s. If you want to play it save, turn to ASIC. The Dragonminter T16 from Halong Mining is the exceptional device since its hash rate is 16 TH/s and it needs 1600 W power supply. However, it consumes only 0.075J/GH against 0.098J/GH in Bitmain’s Antminer S9. The ASICBOOST algorithm is implemented, boosting the efficiency by 20 percent. Butterfly Labs used Facebook, Twitter, and the company website to tout the. machine as the “fastest and most power efficient bitcoin miner yet. Bitcoin ASIC mining hardware from Butterfly Labs. requirements for bitcoin mining bitcoin mining contract review cryptocurrency exchange reviews 77872. cme. Butterfly Labs Item model number BF0005G Hardware Platform PC Operating System Windows 7, Linux Item Weight 1.34 pounds Product Dimensions 10.7 x 8.3 x 5.4 inches Item Dimensions L x W x H 10.7 x 8.3 x 5.4 inches Color Black Processor Brand AMD

[index] [11545] [10841] [28711] [21888] [10167] [8661] [22906] [7415] [23396] [22659]

Butterfly Labs 5 GH/s ASIC Bitcoin mining rig, the Jalapeno

Butterfly Labs 5 GH/s ASIC Bitcoin Miner (Jalapeno) Review - Duration: 11:42. andrewesquivel Recommended for you. 11:42. 420 DOLARES AL DIA EN BITCOIN MINERIA EN LA NUBE 458 THS - Duration: 10 ... Butterfly Labs Monarch bitcoin miner information on power connections and more. ButterflyLabs uploaded and posted 5 years ago Most bitcoin miners make a lot of noise. Butterfly Labs 5 GH/s ASIC Bitcoin Miner (Jalapeno) Review - Duration: 11:42. andrewesquivel 22,103 views. 11:42. How Bitcoin Works Under the Hood - Duration: 22:25. Butterfly Labs 5 GH/s ASIC Bitcoin Miner (Jalapeno) Review - Duration: 11:42. ... Butterfly Labs 25GH/s Bitcoin Miner Short Review - Duration: 2:00. David Lent 7,174 views.

Flag Counter