Bitcoin Core

Diagnosing slow Bitcoin Core Sync Time

Hello,
Trying to setup a full node, and it seems to be crawling along. Are these times normal?
System Status
Is it possible my ISP is throttling down the traffic? Are there any tests I can run to check this?
submitted by crypto_kang to BitcoinBeginners [link] [comments]

Diagnosing slow Bitcoin Core Sync Time /r/BitcoinBeginners

Diagnosing slow Bitcoin Core Sync Time /BitcoinBeginners submitted by BitcoinAllBot to BitcoinAll [link] [comments]

Reduce Bitcoin Core Sync Time /r/Bitcoin

Reduce Bitcoin Core Sync Time /Bitcoin submitted by BitcoinAllBot to BitcoinAll [link] [comments]

I'm betting on 1 hour to sync Bitcoin Core wallet, not 5 weeks... based on ~1 day per second times 10 years :)

I'm betting on 1 hour to sync Bitcoin Core wallet, not 5 weeks... based on ~1 day per second times 10 years :) submitted by E-renter to Bitcoin [link] [comments]

Bitcoin Core painfully slow sync times + missing bitcoin.conf file?

So I've always had trouble syncing my bitcoin qt client, the times are painfully slow, (if it's even progressing at all) and I found out that the bitcoin.conf file is not created automatically and couldn't find out how to create one, there are so many flags to use. Any help?
submitted by BestServerNA to Bitcoin [link] [comments]

Bitcoin Core painfully slow sync times + missing bitcoin.conf file? /r/Bitcoin

Bitcoin Core painfully slow sync times + missing bitcoin.conf file? /Bitcoin submitted by ABitcoinAllBot to BitcoinAll [link] [comments]

Is it normal Bitcoin Core to take such a long time to sync?

I just got into the cryptocurrency world and I have read a lot about how the stuff works and all. At the and I decided to get the core wallets from Bitcoin, Litecoin and Cash. The thing is, litecoin and cash are syncing really fast (cash in fact synced in just a few hours, and litecoin is almost done). I started syncing bitcoin almost a week ago, and the other two just yesterday. I look at the progress bar in the bitcoin wallet and it takes minutes to sync a single block, while the other two seem to sync about 10 blocks per second. Is bitcoin that slow for syncing?
submitted by alexsaderobert to BitcoinBeginners [link] [comments]

Is it normal Bitcoin Core to take such a long time to sync? /r/BitcoinBeginners

Is it normal Bitcoin Core to take such a long time to sync? /BitcoinBeginners submitted by BitcoinAllBot to BitcoinAll [link] [comments]

Rokos core and Blockchain size / sync time (Raspberry pi Bitcoin node)

Hello, As some of you might know, a Bitcoin client has been developped for Pi enthousiats - Rokos Core -. It's easy to install and set up even for neophytes. I had a bitcoin wallet for 4 years now and I decided to switch to this device in order to have a permanently connected wallet.
here is where I get flabbergasted: I have been downloading the blockchain for 6 days and I am not over it yet (1 year 10 weeks remaining) despite my 300 mbits/s Fiber-Optic connection.
Is the download rate on bitcoin network capped ?
TL;DR: wtf 40go blockchain size, very long to sync even with good internet connection, is download rate capped on Bitcoin network?
submitted by Jey_s_TeArS to Bitcoin [link] [comments]

Really impressed by the sync time in Core 0.15. /r/Bitcoin

Really impressed by the sync time in Core 0.15. /Bitcoin submitted by BitcoinAllBot to BitcoinAll [link] [comments]

Bitcoin Core Wallet Sync Times. /r/Bitcoin

Bitcoin Core Wallet Sync Times. /Bitcoin submitted by BitcoinAllBot to BitcoinAll [link] [comments]

I got sent some money to an address, which is in the bitoin core wallet. I just installed it for the first time, and syncing is at 8% after 8 hours /r/Bitcoin

I got sent some money to an address, which is in the bitoin core wallet. I just installed it for the first time, and syncing is at 8% after 8 hours /Bitcoin submitted by BitcoinAllBot to BitcoinAll [link] [comments]

Rokos core and Blockchain size / sync time (Raspberry pi Bitcoin node) /r/Bitcoin

Rokos core and Blockchain size / sync time (Raspberry pi Bitcoin node) /Bitcoin submitted by BitcoinAllBot to BitcoinAll [link] [comments]

Technical: The Path to Taproot Activation

Taproot! Everybody wants to have it, somebody wants to make it, nobody knows how to get it!
(If you are asking why everybody wants it, see: Technical: Taproot: Why Activate?)
(Pedants: I mostly elide over lockin times)
Briefly, Taproot is that neat new thing that gets us:
So yes, let's activate taproot!

The SegWit Wars

The biggest problem with activating Taproot is PTSD from the previous softfork, SegWit. Pieter Wuille, one of the authors of the current Taproot proposal, has consistently held the position that he will not discuss activation, and will accept whatever activation process is imposed on Taproot. Other developers have expressed similar opinions.
So what happened with SegWit activation that was so traumatic? SegWit used the BIP9 activation method. Let's dive into BIP9!

BIP9 Miner-Activated Soft Fork

Basically, BIP9 has a bunch of parameters:
Now there are other parameters (name, starttime) but they are not anywhere near as important as the above two.
A number that is not a parameter, is 95%. Basically, activation of a BIP9 softfork is considered as actually succeeding if at least 95% of blocks in the last 2 weeks had the specified bit in the nVersion set. If less than 95% had this bit set before the timeout, then the upgrade fails and never goes into the network. This is not a parameter: it is a constant defined by BIP9, and developers using BIP9 activation cannot change this.
So, first some simple questions and their answers:

The Great Battles of the SegWit Wars

SegWit not only fixed transaction malleability, it also created a practical softforkable blocksize increase that also rebalanced weights so that the cost of spending a UTXO is about the same as the cost of creating UTXOs (and spending UTXOs is "better" since it limits the size of the UTXO set that every fullnode has to maintain).
So SegWit was written, the activation was decided to be BIP9, and then.... miner signalling stalled at below 75%.
Thus were the Great SegWit Wars started.

BIP9 Feature Hostage

If you are a miner with at least 5% global hashpower, you can hold a BIP9-activated softfork hostage.
You might even secretly want the softfork to actually push through. But you might want to extract concession from the users and the developers. Like removing the halvening. Or raising or even removing the block size caps (which helps larger miners more than smaller miners, making it easier to become a bigger fish that eats all the smaller fishes). Or whatever.
With BIP9, you can hold the softfork hostage. You just hold out and refuse to signal. You tell everyone you will signal, if and only if certain concessions are given to you.
This ability by miners to hold a feature hostage was enabled because of the miner-exit allowed by the timeout on BIP9. Prior to that, miners were considered little more than expendable security guards, paid for the risk they take to secure the network, but not special in the grand scheme of Bitcoin.

Covert ASICBoost

ASICBoost was a novel way of optimizing SHA256 mining, by taking advantage of the structure of the 80-byte header that is hashed in order to perform proof-of-work. The details of ASICBoost are out-of-scope here but you can read about it elsewhere
Here is a short summary of the two types of ASICBoost, relevant to the activation discussion.
Now, "overt" means "obvious", while "covert" means hidden. Overt ASICBoost is obvious because nVersion bits that are not currently in use for BIP9 activations are usually 0 by default, so setting those bits to 1 makes it obvious that you are doing something weird (namely, Overt ASICBoost). Covert ASICBoost is non-obvious because the order of transactions in a block are up to the miner anyway, so the miner rearranging the transactions in order to get lower power consumption is not going to be detected.
Unfortunately, while Overt ASICBoost was compatible with SegWit, Covert ASICBoost was not. This is because, pre-SegWit, only the block header Merkle tree committed to the transaction ordering. However, with SegWit, another Merkle tree exists, which commits to transaction ordering as well. Covert ASICBoost would require more computation to manipulate two Merkle trees, obviating the power benefits of Covert ASICBoost anyway.
Now, miners want to use ASICBoost (indeed, about 60->70% of current miners probably use the Overt ASICBoost nowadays; if you have a Bitcoin fullnode running you will see the logs with lots of "60 of last 100 blocks had unexpected versions" which is exactly what you would see with the nVersion manipulation that Overt ASICBoost does). But remember: ASICBoost was, at around the time, a novel improvement. Not all miners had ASICBoost hardware. Those who did, did not want it known that they had ASICBoost hardware, and wanted to do Covert ASICBoost!
But Covert ASICBoost is incompatible with SegWit, because SegWit actually has two Merkle trees of transaction data, and Covert ASICBoost works by fudging around with transaction ordering in a block, and recomputing two Merkle Trees is more expensive than recomputing just one (and loses the ASICBoost advantage).
Of course, those miners that wanted Covert ASICBoost did not want to openly admit that they had ASICBoost hardware, they wanted to keep their advantage secret because miners are strongly competitive in a very tight market. And doing ASICBoost Covertly was just the ticket, but they could not work post-SegWit.
Fortunately, due to the BIP9 activation process, they could hold SegWit hostage while covertly taking advantage of Covert ASICBoost!

UASF: BIP148 and BIP8

When the incompatibility between Covert ASICBoost and SegWit was realized, still, activation of SegWit stalled, and miners were still not openly claiming that ASICBoost was related to non-activation of SegWit.
Eventually, a new proposal was created: BIP148. With this rule, 3 months before the end of the SegWit timeout, nodes would reject blocks that did not signal SegWit. Thus, 3 months before SegWit timeout, BIP148 would force activation of SegWit.
This proposal was not accepted by Bitcoin Core, due to the shortening of the timeout (it effectively times out 3 months before the initial SegWit timeout). Instead, a fork of Bitcoin Core was created which added the patch to comply with BIP148. This was claimed as a User Activated Soft Fork, UASF, since users could freely download the alternate fork rather than sticking with the developers of Bitcoin Core.
Now, BIP148 effectively is just a BIP9 activation, except at its (earlier) timeout, the new rules would be activated anyway (instead of the BIP9-mandated behavior that the upgrade is cancelled at the end of the timeout).
BIP148 was actually inspired by the BIP8 proposal (the link here is a historical version; BIP8 has been updated recently, precisely in preparation for Taproot activation). BIP8 is basically BIP9, but at the end of timeout, the softfork is activated anyway rather than cancelled.
This removed the ability of miners to hold the softfork hostage. At best, they can delay the activation, but not stop it entirely by holding out as in BIP9.
Of course, this implies risk that not all miners have upgraded before activation, leading to possible losses for SPV users, as well as again re-pressuring miners to signal activation, possibly without the miners actually upgrading their software to properly impose the new softfork rules.

BIP91, SegWit2X, and The Aftermath

BIP148 inspired countermeasures, possibly from the Covert ASiCBoost miners, possibly from concerned users who wanted to offer concessions to miners. To this day, the common name for BIP148 - UASF - remains an emotionally-charged rallying cry for parts of the Bitcoin community.
One of these was SegWit2X. This was brokered in a deal between some Bitcoin personalities at a conference in New York, and thus part of the so-called "New York Agreement" or NYA, another emotionally-charged acronym.
The text of the NYA was basically:
  1. Set up a new activation threshold at 80% signalled at bit 4 (vs bit 1 for SegWit).
    • When this 80% signalling was reached, miners would require that bit 1 for SegWit be signalled to achive the 95% activation needed for SegWit.
  2. If the bit 4 signalling reached 80%, increase the block weight limit from the SegWit 4000000 to the SegWit2X 8000000, 6 months after bit 1 activation.
The first item above was coded in BIP91.
Unfortunately, if you read the BIP91, independently of NYA, you might come to the conclusion that BIP91 was only about lowering the threshold to 80%. In particular, BIP91 never mentions anything about the second point above, it never mentions that bit 4 80% threshold would also signal for a later hardfork increase in weight limit.
Because of this, even though there are claims that NYA (SegWit2X) reached 80% dominance, a close reading of BIP91 shows that the 80% dominance was only for SegWit activation, without necessarily a later 2x capacity hardfork (SegWit2X).
This ambiguity of bit 4 (NYA says it includes a 2x capacity hardfork, BIP91 says it does not) has continued to be a thorn in blocksize debates later. Economically speaking, Bitcoin futures between SegWit and SegWit2X showed strong economic dominance in favor of SegWit (SegWit2X futures were traded at a fraction in value of SegWit futures: I personally made a tidy but small amount of money betting against SegWit2X in the futures market), so suggesting that NYA achieved 80% dominance even in mining is laughable, but the NYA text that ties bit 4 to SegWit2X still exists.
Historically, BIP91 triggered which caused SegWit to activate before the BIP148 shorter timeout. BIP148 proponents continue to hold this day that it was the BIP148 shorter timeout and no-compromises-activate-on-August-1 that made miners flock to BIP91 as a face-saving tactic that actually removed the second clause of NYA. NYA supporters keep pointing to the bit 4 text in the NYA and the historical activation of BIP91 as a failed promise by Bitcoin developers.

Taproot Activation Proposals

There are two primary proposals I can see for Taproot activation:
  1. BIP8.
  2. Modern Softfork Activation.
We have discussed BIP8: roughly, it has bit and timeout, if 95% of miners signal bit it activates, at the end of timeout it activates. (EDIT: BIP8 has had recent updates: at the end of timeout it can now activate or fail. For the most part, in the below text "BIP8", means BIP8-and-activate-at-timeout, and "BIP9" means BIP8-and-fail-at-timeout)
So let's take a look at Modern Softfork Activation!

Modern Softfork Activation

This is a more complex activation method, composed of BIP9 and BIP8 as supcomponents.
  1. First have a 12-month BIP9 (fail at timeout).
  2. If the above fails to activate, have a 6-month discussion period during which users and developers and miners discuss whether to continue to step 3.
  3. Have a 24-month BIP8 (activate at timeout).
The total above is 42 months, if you are counting: 3.5 years worst-case activation.
The logic here is that if there are no problems, BIP9 will work just fine anyway. And if there are problems, the 6-month period should weed it out. Finally, miners cannot hold the feature hostage since the 24-month BIP8 period will exist anyway.

PSA: Being Resilient to Upgrades

Software is very birttle.
Anyone who has been using software for a long time has experienced something like this:
  1. You hear a new version of your favorite software has a nice new feature.
  2. Excited, you install the new version.
  3. You find that the new version has subtle incompatibilities with your current workflow.
  4. You are sad and downgrade to the older version.
  5. You find out that the new version has changed your files in incompatible ways that the old version cannot work with anymore.
  6. You tearfully reinstall the newer version and figure out how to get your lost productivity now that you have to adapt to a new workflow
If you are a technically-competent user, you might codify your workflow into a bunch of programs. And then you upgrade one of the external pieces of software you are using, and find that it has a subtle incompatibility with your current workflow which is based on a bunch of simple programs you wrote yourself. And if those simple programs are used as the basis of some important production system, you hve just screwed up because you upgraded software on an important production system.
And well, one of the issues with new softfork activation is that if not enough people (users and miners) upgrade to the newest Bitcoin software, the security of the new softfork rules are at risk.
Upgrading software of any kind is always a risk, and the more software you build on top of the software-being-upgraded, the greater you risk your tower of software collapsing while you change its foundations.
So if you have some complex Bitcoin-manipulating system with Bitcoin somewhere at the foundations, consider running two Bitcoin nodes:
  1. One is a "stable-version" Bitcoin node. Once it has synced, set it up to connect=x.x.x.x to the second node below (so that your ISP bandwidth is only spent on the second node). Use this node to run all your software: it's a stable version that you don't change for long periods of time. Enable txiindex, disable pruning, whatever your software needs.
  2. The other is an "always-up-to-date" Bitcoin Node. Keep its stoarge down with pruning (initially sync it off the "stable-version" node). You can't use blocksonly if your "stable-version" node needs to send transactions, but otherwise this "always-up-to-date" Bitcoin node can be kept as a low-resource node, so you can run both nodes in the same machine.
When a new Bitcoin version comes up, you just upgrade the "always-up-to-date" Bitcoin node. This protects you if a future softfork activates, you will only receive valid Bitcoin blocks and transactions. Since this node has nothing running on top of it, it is just a special peer of the "stable-version" node, any software incompatibilities with your system software do not exist.
Your "stable-version" Bitcoin node remains the same version until you are ready to actually upgrade this node and are prepared to rewrite most of the software you have running on top of it due to version compatibility problems.
When upgrading the "always-up-to-date", you can bring it down safely and then start it later. Your "stable-version" wil keep running, disconnected from the network, but otherwise still available for whatever queries. You do need some system to stop the "always-up-to-date" node if for any reason the "stable-version" goes down (otherwisee if the "always-up-to-date" advances its pruning window past what your "stable-version" has, the "stable-version" cannot sync afterwards), but if you are technically competent enough that you need to do this, you are technically competent enough to write such a trivial monitor program (EDIT: gmax notes you can adjust the pruning window by RPC commands to help with this as well).
This recommendation is from gmaxwell on IRC, by the way.
submitted by almkglor to Bitcoin [link] [comments]

/r/Monero Weekly Discussion – July 11, 2020 - Use this thread for general chatter, basic questions, and if you're new to Monero

Index

  1. General questions
  2. Wallet: CLI & GUI
  3. Wallet: Ledger
  4. Nodes

1. General questions

Where can I download the Monero wallet?

There are multiple Monero wallets for a wide range of devices at your disposal. Check the table below for details and download links. Attention: for extra security make sure to calculate and compare the checksum of your downloaded files when possible.
Please note the following usage of the labels:
⚠️ - Relatively new and/or beta. Use wallet with caution.
☢️ - Closed source.

Desktop wallets

Wallet Device Description Download link
"Official" GUI / CLI Windows, macOS, Linux Default implementation maintained by the core team. Use this wallet to run a full node and obtain maximum privacy. Integrates with hardware wallets. Current version: 0.15.0.1 / 0.15.0.4. GetMonero.org
MyMonero Windows, macOS, Linux Lightweight wallet -- you don't need to download the blockchain and run a node. MyMonero was developed with the assistance of the core team. It also has web-based and iOS versions. MyMonero.com
Exodus Windows, macOS, Linux ⚠️ / Multi-asset wallet. Exodus.io
ZelCore Windows, macOS, Linux ⚠️ / Multi-asset wallet. It also has Android and iOS versions. Zeltrez.io
Guarda Windows, macOS, Linux ⚠️ ☢️ / Multi-asset wallet. Guarda.co

Mobile wallets

Wallet Device Description Download link
Monerujo Android Integrates with Ledger (hardware wallet). Website: https://www.monerujo.io/. Google Play / F-Droid / GitHub
MyMonero iOS Website: https://mymonero.com/ App Store
Cake Wallet iOS Website: https://cakewallet.io/ App Store
X Wallet iOS Website: https://xwallet.tech/ App Store
Edge Wallet Android / iOS Multi-asset wallet. Website: https://edge.app/ Google Play / App Store
ZelCore Android / iOS ⚠️ / Multi-asset wallet. Website: https://zelcore.io/ Google Play / App Store
Coinomi Android / iOS ⚠️ ☢️ / Multi-asset wallet. Website: https://www.coinomi.com/ Google Play / App Store
Moxi / Guarda Android / iOS ⚠️ ☢️ / Multi-asset wallet. Website: https://guarda.co/ Google Play / App Store
Exa Wallet Android / iOS ⚠️ Website: https://exan.tech/ Google Play / App Store
Wookey Wallet Android / iOS ⚠️ Website: https://wallet.wookey.io/ Google Play / F-Droid / App Store
Exodus Android / iOS ⚠️ / Multi-asset wallet. Website: https://www.exodus.io/monero/) Google Play / [App Store](https://apps.apple.com/app/exodus-crypto-wallet/id1414384820

Web-based wallets

Wallet Description Link
MyMonero Web version of the MyMonero wallet. Web
XMRWallet Web wallet with TOR support. Web / Onion URL
Guarda Multi-asset wallet. Web

How long does it take for my balance to unlock?

Your balance is unlocked after 10 confirmations (which means 10 mined blocks). A block is mined approximately every two minutes on the Monero network, so that would be around 20 minutes.

How can I prove that I sent a payment?

The fastest and most direct way is by using the ExploreMonero blockchain explorer. You will need to recover the transaction key from your wallet (complete guide for GUI / CLI).

How do I buy Monero (XMR) with Bitcoin (BTC)?

There are dozens of exchanges that trade Monero against Bitcoin and other cryptocurrencies. Check out the list on CoinMarketCap and choose the option that suits you best.

How do I buy Monero (XMR) with fiat?

How can I quickly exchange my Monero (XMR) for Bitcoin (BTC)?

There are multiple ways to exchange your Monero for Bitcoin, but first of all, I'd like to remind you that if you really want to do your part for Monero, one of the simplest ways is to get in touch with your merchant/service provider and request for it to accept Monero directly as payment. Ask the service provider to visit the official website and our communication channels if he or she needs help with system integration.
That being said, the community has been recommending two services in particular, XMR.TO and MorphToken. These services are only recommendations and are operated by entities outside the control of the Monero Project. Be diligent.

How do I mine Monero? And other mining questions.

The correct place to ask questions and discuss the Monero mining scene is in the dedicated subreddit MoneroMining. That being said, you can find a list of pools and available mining software in the GetMonero.org website.

2. Wallet: CLI & GUI

Why I can't see my balance? Where is my XMR?

Before any action there are two things to check:
  1. Are you using the latest available version of the wallet? A new version is released roughly every 6 months, so make sure you're using the current release (compare the release on GetMonero.org with your wallet's version on Settings, under Debug info).
  2. Is your wallet fully synchronized? If it isn't, wait the sync to complete.
Because Monero is different from Bitcoin, wallet synchronization is not instant. The software needs to synchronize the blockchain and use your private keys to identify your transactions. Check in the lower left corner (GUI) if the wallet is synchronized.
You can't send transactions and your balance might be wrong or unavailable if the wallet is not synced with the network. So please wait.
If this is not a sufficient answer for your case and you're looking for more information, please see this answer on StackExchange.

How do I upgrade my wallet to the newest version?

This question is beautifully answered on StackExchange.

Why does it take so long to sync the wallet [for the first time]?

You have decided to use Monero's wallet and run a local node. Congratulations! You have chosen the safest and most secure option for your privacy, but unfortunately this has an initial cost. The first reason for the slowness is that you will need to download the entire blockchain, which is considerably heavy (+70 GB) and constantly growing. There are technologies being implemented in Monero to slow this growth, however it is inevitable to make this initial download to run a full node. Consider syncing to a device that has an SSD instead of an HDD, as this greatly impacts the speed of synchronization.
Now that the blockchain is on your computer, the next time you run the wallet you only need to download new blocks, which should take seconds or minutes (depending on how often you use the wallet).

I don't want to download the blockchain, how can I skip that?

The way to skip downloading the blockchain is connecting your wallet to a public remote node. You can follow this guide on how to set it up. You can find a list of public remote nodes on MoneroWorld.
Be advised that when using a public remote node you lose some of your privacy. A public remote node is able to identify your IP and opens up a range for certain attacks that further diminish your privacy. A remote node can't see your balance and it can't spend your XMR.

How do I restore my wallet from the mnemonic seed or from the keys?

To restore your wallet with the 25 word mnemonic seed, please see this guide.
To restore your wallet with your keys, please see this guide.

3. Wallet: Ledger

How do I generate a Ledger Monero Wallet with the GUI or CLI?

This question is beautifully answered on StackExchange. Check this page for the GUI instructions, and this page for the CLI instructions.

4. Nodes

How can my local node become a public remote node?

If you want to support other Monero users by making your node public, you can follow the instructions on MoneroWorld, under the section "How To Include Your Node On Moneroworld".

How can I connect my node via Tor?

This question is beautifully answered on StackExchange.
submitted by AutoModerator to Monero [link] [comments]

Greg Maxwell caught brigading with paid accounts

I had a discussion with nullc aka Greg Maxwell former CTO from Blockstream and Bitcoin Core developer.
In the discussion with him he refused to continue the discussion unless you agreed to some "Boston agreement". Don't ask me what it is, I googled it and have no clue wtf a Boston agreement is.
I told him to just dump the data and be done with it. Just for reference the argument was back and forth for a while and about 20 comments deep so most redditors don't dig that deep and the conversation would not be visible to most users unless you followed that thread to the end. This is a key detail.
The other key detail is that all 3 of these sock puppet accounts along with Maxwell understood what a Boston agreement is, and acted as "witnesses". Kind of odd since Google doesn't even have a definition for it. So either they've been notified to play along or are just are in sync with Maxwell's trolling.
Long story short, 3 separate accounts all "witnessed" Greg Maxwell's agreement as well as harassed me about the agreement despite being inactive for 3-7 days prior.
\o I agree to commit to 500239 deleting his account when he inevitably loses.
You already lost this argument many posts ago, give it up dude. You’ve been obliterated and now it is time to delete your account like nullc has deleted your credibility.
F.
Herewith my support for the Boston Agreement. I feel deeply concerned for the mental health of Bitmain shill u/500239 having to endure your relentless public humiliation.
It would be in his own interest to urgently delete his account and stop being an easy target to your ass-handing ways.
(I will miss the entertainment though so part of me hopes u/500239 weasels their way out and given their post history that is the expected outcome).
The explanation is simple:
1) Either these 3 accounts have been stalking me to be able to jump on a thread that was 20 comments deep.
or
2) Greg Maxwell notified these accounts to jump and brigade on your conversation within minutes that it was happening
Looks like Greg Maxwell is back to manipulating forums much like he had a history of manipulating Wikipedia and other information mediums.
edit1: Another minor detail. I've never been called a "Bitmain shill" ever. This week 2 people to call me a Bitmain shill have been Greg Maxwell and trilli0nn . Pretty specific if you ask me.
edit2: Last person to request I delete my account was BeardedCake, who is now banned from this subreddit for continued user harassment.... Coincidentally ever since his ban his account has been inactive so it's possible he rotated to another bought account. I've been asked by 3 users in no less than 1 month to delete my account, and attempting to guilt, harass and threaten me until I do so. It's another attempt to censor outside of /bitcoin where normally the moderators there would just delete information they didn't approve of.
submitted by 500239 to btc [link] [comments]

The next XVG? Microcap 100x potential actually supported by fundamentals!

What’s up team? I have a hot one for you. XVG returned 12 million percent in 2017 and this one reminds me a lot of it. Here’s why:
Mimblewimble is like Blu-Ray compared to CD-ROM in terms of its ability to compress data on a blockchain. The current BTC chain is 277gb and its capacity is limited because every time you spend a coin, each node needs to validate its history back to when it was mined (this is how double spending is prevented). Mimblewimble is different - all transactions in a block are aggregated and netted out in one giant CoinJoin, and only the current spending needs to be verified. This means that dramatically more transactions can fit into a smaller space, increasing throughput and lowering fees while still retaining the full proof of work game theory of Bitcoin. These blockchains are small enough to run a full node on a cheap smartphone, which enhances the decentralization and censorship resistance of the network.
The biggest benefit, though, is that all transactions are private - the blockchain doesn’t reveal amounts or addresses except to the actual wallet owner. Unlike earlier decoy-based approaches that bloat the chain and can still be data mined (XMR), Mimblewimble leaves no trace in the blockchain, instead storing only the present state of coin ownership.
The first two Mimblewimble coins, Grin and Beam, launched to great fanfare in 2019, quickly reaching over $100m in market cap (since settled down to $22m and $26m respectively). They are good projects but grin has infinite supply and huge never-decreasing emission, and Beam is a corporate moneygrab whose founding investors are counting on you buying for their ROI.
ZEC is valued at $568m today, despite the facts that only 1% of transactions are actually shielded, it has a trusted setup, and generating a confidential transaction takes ~60 seconds on a powerful PC. XMR is a great project but it’s valued at $1.2b (so no 100x) and it uses CryptoNote, which is 2014 tech that relies on a decoy-based approach that could be vulnerable to more powerful computers in the future. Mimblewimble is just a better way to approach privacy because there is simply no data recorded in the blockchain for companies to surveil.
Privacy is not just for darknet markets, porn, money launderers and terrorists. In many countries it’s dangerous to be wealthy, and there are all kinds of problems with having your spending data be out there publicly and permanently for all to see. Namely, companies like Amazon are patenting approaches to identify people with their crypto addresses, “for law enforcement” but also so that, just like credit cards, your spending data can be used to target ads. (A) Coinbase is selling user data to the DEA, IRS, FBI, Secret Service, and who knows who else? (B) What about insurance companies raising your premiums or canceling your policy because they see you buying (legal) cannabis? If your business operates using transparent cryptocurrency, competitors can data mine your customer and supply chain data, and employees can see how much everyone else gets paid. I could go on, but the idea of “I have nothing to hide, so what do I care about privacy?” will increasingly ring hollow as people realize that this money printing will have to be paid by massive tax increases AND that those taxes will be directly debited from their “Central Bank Digital Currency” wallets.
100% privacy for all transactions also eliminates one HUGE problem that people aren’t aware of yet, but they will be: fungibility. Fungibility means that each coin is indistinguishable from any other, just like paper cash. Why is this important? Because of the ever-expanding reach of AML/KYC/KYT (Anti-Money Laundering / Know Your Customer / Know Your Transaction) as regulators cramp down on crypto and banks take over, increasingly coins become “tainted” in various ways. For example, if you withdraw coins to a mixing service like Wasabi or Samourai, you may find your account blocked. (C) The next obvious step is that if you receive coins that these chainalysis services don’t like for whatever reason, you will be completely innocent yet forced to prove that you didn’t know that the coins you bought were up to no good in a past life. 3 days ago, $100k of USDC was frozen. (D) Even smaller coins like LTC now have this problem, because “Chinese Drug Kingpins” used them. (E) I believe that censorable money that can be blocked/frozen isn’t really “your money”.
Epic Cash is a 100% volunteer community project (like XVG and XMR) that had a fair launch in September last year with no ICO and no premine. There are very few projects like this, and it’s a key ingredient in Verge’s success (still at $110m market cap today despite being down 97% since the bubble peak) and why it’s still around. It has a small but super passionate community of “Freemen” who are united by a belief in the sound money economics of Bitcoin Standard emission (21m supply limit and ever-decreasing inflation) and the importance of privacy.
I am super bullish on this coin for the following reasons:
Because it doesn’t have a huge marketing budget in a sea of VC-funded shitcoins, it is as-yet undiscovered, which is why it’s so cheap. There are only 4 Mimblewimble-based currencies on the market: MWC at $162m, BEAM at $26m, GRIN at $22m, and EPIC at $0.4m. This is not financial advice and as always, do your own research, but I’ve been buying this gem for months and will continue to.
This one ticks all the boxes for me, the only real problem is that it’s hard to buy much without causing a huge green candle. Alt season is coming, and coins like this are how your neighbor Chad got his Lambo back in 2017. For 2021, McLaren is a better choice and be sure to pay cash so that it doesn’t get repossessed like Chad!
  1. A https://www.vice.com/en_us/article/d35eax/amazon-bitcoin-patent-data-stream-identify-cryptocurrency-for-law-enforcement-government
  2. B https://decrypt.co/31461/coinbase-wants-to-identify-bitcoin-users-for-dea-irs
  3. C https://www.coindesk.com/binance-blockade-of-wasabi-wallet-could-point-to-a-crypto-crack-up
  4. D https://cointelegraph.com/news/centre-freezes-ethereum-address-holding-100k-usdc
  5. E https://www.coindesk.com/us-treasury-blacklists-bitcoin-litecoin-addresses-of-chinese-drug-kingpins
  6. F https://www.youtube.com/channel/UCWkTxl5Z6DNN0ASMRxSKV5g
  7. G http://epic.tech/whitepaper
  8. H https://medium.com/epic-cash/epic-cash-on-uniswap-22447904d375
  9. I https://epic.tech/wp-content/uploads/2019/09/figure-3.1.jpg
Links:
submitted by pinchegringo to CryptoMoonShots [link] [comments]

/r/Monero Weekly Discussion – June 20, 2020 - Use this thread for general chatter, basic questions, and if you're new to Monero

Index

  1. General questions
  2. Wallet: CLI & GUI
  3. Wallet: Ledger
  4. Nodes

1. General questions

Where can I download the Monero wallet?

There are multiple Monero wallets for a wide range of devices at your disposal. Check the table below for details and download links. Attention: for extra security make sure to calculate and compare the checksum of your downloaded files when possible.
Please note the following usage of the labels:
⚠️ - Relatively new and/or beta. Use wallet with caution.
☢️ - Closed source.

Desktop wallets

Wallet Device Description Download link
"Official" GUI / CLI Windows, macOS, Linux Default implementation maintained by the core team. Use this wallet to run a full node and obtain maximum privacy. Integrates with hardware wallets. Current version: 0.15.0.1 / 0.15.0.4. GetMonero.org
MyMonero Windows, macOS, Linux Lightweight wallet -- you don't need to download the blockchain and run a node. MyMonero was developed with the assistance of the core team. It also has web-based and iOS versions. MyMonero.com
Exodus Windows, macOS, Linux ⚠️ / Multi-asset wallet. Exodus.io
ZelCore Windows, macOS, Linux ⚠️ / Multi-asset wallet. It also has Android and iOS versions. Zeltrez.io
Guarda Windows, macOS, Linux ⚠️ ☢️ / Multi-asset wallet. Guarda.co

Mobile wallets

Wallet Device Description Download link
Monerujo Android Integrates with Ledger (hardware wallet). Website: https://www.monerujo.io/. Google Play / F-Droid / GitHub
MyMonero iOS Website: https://mymonero.com/ App Store
Cake Wallet iOS Website: https://cakewallet.io/ App Store
X Wallet iOS Website: https://xwallet.tech/ App Store
Edge Wallet Android / iOS Multi-asset wallet. Website: https://edge.app/ Google Play / App Store
ZelCore Android / iOS ⚠️ / Multi-asset wallet. Website: https://zelcore.io/ Google Play / App Store
Coinomi Android / iOS ⚠️ ☢️ / Multi-asset wallet. Website: https://www.coinomi.com/ Google Play / App Store
Moxi / Guarda Android / iOS ⚠️ ☢️ / Multi-asset wallet. Website: https://guarda.co/ Google Play / App Store
Exa Wallet Android / iOS ⚠️ Website: https://exan.tech/ Google Play / App Store
Wookey Wallet Android / iOS ⚠️ Website: https://wallet.wookey.io/ Google Play / F-Droid / App Store
Exodus Android / iOS ⚠️ / Multi-asset wallet. Website: https://www.exodus.io/monero/) Google Play / [App Store](https://apps.apple.com/app/exodus-crypto-wallet/id1414384820

Web-based wallets

Wallet Description Link
MyMonero Web version of the MyMonero wallet. Web
XMRWallet Web wallet with TOR support. Web / Onion URL
Guarda Multi-asset wallet. Web

How long does it take for my balance to unlock?

Your balance is unlocked after 10 confirmations (which means 10 mined blocks). A block is mined approximately every two minutes on the Monero network, so that would be around 20 minutes.

How can I prove that I sent a payment?

The fastest and most direct way is by using the ExploreMonero blockchain explorer. You will need to recover the transaction key from your wallet (complete guide for GUI / CLI).

How do I buy Monero (XMR) with Bitcoin (BTC)?

There are dozens of exchanges that trade Monero against Bitcoin and other cryptocurrencies. Check out the list on CoinMarketCap and choose the option that suits you best.

How do I buy Monero (XMR) with fiat?

How can I quickly exchange my Monero (XMR) for Bitcoin (BTC)?

There are multiple ways to exchange your Monero for Bitcoin, but first of all, I'd like to remind you that if you really want to do your part for Monero, one of the simplest ways is to get in touch with your merchant/service provider and request for it to accept Monero directly as payment. Ask the service provider to visit the official website and our communication channels if he or she needs help with system integration.
That being said, the community has been recommending two services in particular, XMR.TO and MorphToken. These services are only recommendations and are operated by entities outside the control of the Monero Project. Be diligent.

How do I mine Monero? And other mining questions.

The correct place to ask questions and discuss the Monero mining scene is in the dedicated subreddit MoneroMining. That being said, you can find a list of pools and available mining software in the GetMonero.org website.

2. Wallet: CLI & GUI

Why I can't see my balance? Where is my XMR?

Before any action there are two things to check:
  1. Are you using the latest available version of the wallet? A new version is released roughly every 6 months, so make sure you're using the current release (compare the release on GetMonero.org with your wallet's version on Settings, under Debug info).
  2. Is your wallet fully synchronized? If it isn't, wait the sync to complete.
Because Monero is different from Bitcoin, wallet synchronization is not instant. The software needs to synchronize the blockchain and use your private keys to identify your transactions. Check in the lower left corner (GUI) if the wallet is synchronized.
You can't send transactions and your balance might be wrong or unavailable if the wallet is not synced with the network. So please wait.
If this is not a sufficient answer for your case and you're looking for more information, please see this answer on StackExchange.

How do I upgrade my wallet to the newest version?

This question is beautifully answered on StackExchange.

Why does it take so long to sync the wallet [for the first time]?

You have decided to use Monero's wallet and run a local node. Congratulations! You have chosen the safest and most secure option for your privacy, but unfortunately this has an initial cost. The first reason for the slowness is that you will need to download the entire blockchain, which is considerably heavy (+70 GB) and constantly growing. There are technologies being implemented in Monero to slow this growth, however it is inevitable to make this initial download to run a full node. Consider syncing to a device that has an SSD instead of an HDD, as this greatly impacts the speed of synchronization.
Now that the blockchain is on your computer, the next time you run the wallet you only need to download new blocks, which should take seconds or minutes (depending on how often you use the wallet).

I don't want to download the blockchain, how can I skip that?

The way to skip downloading the blockchain is connecting your wallet to a public remote node. You can follow this guide on how to set it up. You can find a list of public remote nodes on MoneroWorld.
Be advised that when using a public remote node you lose some of your privacy. A public remote node is able to identify your IP and opens up a range for certain attacks that further diminish your privacy. A remote node can't see your balance and it can't spend your XMR.

How do I restore my wallet from the mnemonic seed or from the keys?

To restore your wallet with the 25 word mnemonic seed, please see this guide.
To restore your wallet with your keys, please see this guide.

3. Wallet: Ledger

How do I generate a Ledger Monero Wallet with the GUI or CLI?

This question is beautifully answered on StackExchange. Check this page for the GUI instructions, and this page for the CLI instructions.

4. Nodes

How can my local node become a public remote node?

If you want to support other Monero users by making your node public, you can follow the instructions on MoneroWorld, under the section "How To Include Your Node On Moneroworld".

How can I connect my node via Tor?

This question is beautifully answered on StackExchange.
submitted by AutoModerator to Monero [link] [comments]

/r/Monero Weekly Discussion – July 04, 2020 - Use this thread for general chatter, basic questions, and if you're new to Monero

Index

  1. General questions
  2. Wallet: CLI & GUI
  3. Wallet: Ledger
  4. Nodes

1. General questions

Where can I download the Monero wallet?

There are multiple Monero wallets for a wide range of devices at your disposal. Check the table below for details and download links. Attention: for extra security make sure to calculate and compare the checksum of your downloaded files when possible.
Please note the following usage of the labels:
⚠️ - Relatively new and/or beta. Use wallet with caution.
☢️ - Closed source.

Desktop wallets

Wallet Device Description Download link
"Official" GUI / CLI Windows, macOS, Linux Default implementation maintained by the core team. Use this wallet to run a full node and obtain maximum privacy. Integrates with hardware wallets. Current version: 0.15.0.1 / 0.15.0.4. GetMonero.org
MyMonero Windows, macOS, Linux Lightweight wallet -- you don't need to download the blockchain and run a node. MyMonero was developed with the assistance of the core team. It also has web-based and iOS versions. MyMonero.com
Exodus Windows, macOS, Linux ⚠️ / Multi-asset wallet. Exodus.io
ZelCore Windows, macOS, Linux ⚠️ / Multi-asset wallet. It also has Android and iOS versions. Zeltrez.io
Guarda Windows, macOS, Linux ⚠️ ☢️ / Multi-asset wallet. Guarda.co

Mobile wallets

Wallet Device Description Download link
Monerujo Android Integrates with Ledger (hardware wallet). Website: https://www.monerujo.io/. Google Play / F-Droid / GitHub
MyMonero iOS Website: https://mymonero.com/ App Store
Cake Wallet iOS Website: https://cakewallet.io/ App Store
X Wallet iOS Website: https://xwallet.tech/ App Store
Edge Wallet Android / iOS Multi-asset wallet. Website: https://edge.app/ Google Play / App Store
ZelCore Android / iOS ⚠️ / Multi-asset wallet. Website: https://zelcore.io/ Google Play / App Store
Coinomi Android / iOS ⚠️ ☢️ / Multi-asset wallet. Website: https://www.coinomi.com/ Google Play / App Store
Moxi / Guarda Android / iOS ⚠️ ☢️ / Multi-asset wallet. Website: https://guarda.co/ Google Play / App Store
Exa Wallet Android / iOS ⚠️ Website: https://exan.tech/ Google Play / App Store
Wookey Wallet Android / iOS ⚠️ Website: https://wallet.wookey.io/ Google Play / F-Droid / App Store
Exodus Android / iOS ⚠️ / Multi-asset wallet. Website: https://www.exodus.io/monero/) Google Play / [App Store](https://apps.apple.com/app/exodus-crypto-wallet/id1414384820

Web-based wallets

Wallet Description Link
MyMonero Web version of the MyMonero wallet. Web
XMRWallet Web wallet with TOR support. Web / Onion URL
Guarda Multi-asset wallet. Web

How long does it take for my balance to unlock?

Your balance is unlocked after 10 confirmations (which means 10 mined blocks). A block is mined approximately every two minutes on the Monero network, so that would be around 20 minutes.

How can I prove that I sent a payment?

The fastest and most direct way is by using the ExploreMonero blockchain explorer. You will need to recover the transaction key from your wallet (complete guide for GUI / CLI).

How do I buy Monero (XMR) with Bitcoin (BTC)?

There are dozens of exchanges that trade Monero against Bitcoin and other cryptocurrencies. Check out the list on CoinMarketCap and choose the option that suits you best.

How do I buy Monero (XMR) with fiat?

How can I quickly exchange my Monero (XMR) for Bitcoin (BTC)?

There are multiple ways to exchange your Monero for Bitcoin, but first of all, I'd like to remind you that if you really want to do your part for Monero, one of the simplest ways is to get in touch with your merchant/service provider and request for it to accept Monero directly as payment. Ask the service provider to visit the official website and our communication channels if he or she needs help with system integration.
That being said, the community has been recommending two services in particular, XMR.TO and MorphToken. These services are only recommendations and are operated by entities outside the control of the Monero Project. Be diligent.

How do I mine Monero? And other mining questions.

The correct place to ask questions and discuss the Monero mining scene is in the dedicated subreddit MoneroMining. That being said, you can find a list of pools and available mining software in the GetMonero.org website.

2. Wallet: CLI & GUI

Why I can't see my balance? Where is my XMR?

Before any action there are two things to check:
  1. Are you using the latest available version of the wallet? A new version is released roughly every 6 months, so make sure you're using the current release (compare the release on GetMonero.org with your wallet's version on Settings, under Debug info).
  2. Is your wallet fully synchronized? If it isn't, wait the sync to complete.
Because Monero is different from Bitcoin, wallet synchronization is not instant. The software needs to synchronize the blockchain and use your private keys to identify your transactions. Check in the lower left corner (GUI) if the wallet is synchronized.
You can't send transactions and your balance might be wrong or unavailable if the wallet is not synced with the network. So please wait.
If this is not a sufficient answer for your case and you're looking for more information, please see this answer on StackExchange.

How do I upgrade my wallet to the newest version?

This question is beautifully answered on StackExchange.

Why does it take so long to sync the wallet [for the first time]?

You have decided to use Monero's wallet and run a local node. Congratulations! You have chosen the safest and most secure option for your privacy, but unfortunately this has an initial cost. The first reason for the slowness is that you will need to download the entire blockchain, which is considerably heavy (+70 GB) and constantly growing. There are technologies being implemented in Monero to slow this growth, however it is inevitable to make this initial download to run a full node. Consider syncing to a device that has an SSD instead of an HDD, as this greatly impacts the speed of synchronization.
Now that the blockchain is on your computer, the next time you run the wallet you only need to download new blocks, which should take seconds or minutes (depending on how often you use the wallet).

I don't want to download the blockchain, how can I skip that?

The way to skip downloading the blockchain is connecting your wallet to a public remote node. You can follow this guide on how to set it up. You can find a list of public remote nodes on MoneroWorld.
Be advised that when using a public remote node you lose some of your privacy. A public remote node is able to identify your IP and opens up a range for certain attacks that further diminish your privacy. A remote node can't see your balance and it can't spend your XMR.

How do I restore my wallet from the mnemonic seed or from the keys?

To restore your wallet with the 25 word mnemonic seed, please see this guide.
To restore your wallet with your keys, please see this guide.

3. Wallet: Ledger

How do I generate a Ledger Monero Wallet with the GUI or CLI?

This question is beautifully answered on StackExchange. Check this page for the GUI instructions, and this page for the CLI instructions.

4. Nodes

How can my local node become a public remote node?

If you want to support other Monero users by making your node public, you can follow the instructions on MoneroWorld, under the section "How To Include Your Node On Moneroworld".

How can I connect my node via Tor?

This question is beautifully answered on StackExchange.
submitted by AutoModerator to Monero [link] [comments]

Welcome to the Official Energi Cryptocurrency Reddit!

Welcome to the Official Energi Cryptocurrency Reddit!

https://preview.redd.it/mymfi39kf2c51.png?width=200&format=png&auto=webp&s=71c90d32c9bf87dbd393e85bbeedb753e202a5b0
Below you will find a Table of Contents that will cover all the fundamentals of the cryptocurrency.

Table of Contents

  1. What is Energi?
  2. What are the Fundamentals of Energi?
    1. Scalability
    2. Funding
    3. Governance
    4. Inflation
    5. Distribution
    6. Decentralization
    7. Long Term Vision
  3. Coin Specs
  4. How to Get Started
    1. Official Energi Website
    2. Social Media
    3. Exchanges
    4. Energi Block Explorers
    5. Wallet Downloads
    6. Proof-of-Stake Setup Guides
    7. Masternode Setup Guide
  5. FAQ

1. What is Energi

Energi is a self-funding (no ICO and no premine) cryptocurrency that has a purpose to become the world’s leading cryptocurrency with the unification of Smart Contracts, Governance and Self-funding Treasury to ensure longevity and enable rapid growth. You can read more about why we decided to self-fund and chose not to conduct an ICO here.
Energi provides a small allocation to Proof-of-Stake (PoS) rewards, takes a bulk of the coin issuance and gives it to its treasury and active Masternodes. Energi also allocates 10% on-going reward to the leadership of the Energi Backbone, which is significantly less compared to today’s ICOs’ rewarding their founders between 20–50% of the tokens distributed. Another trait that sets Energi apart from ICOs is they give an on-going 10% allocation through each block reward, rather than rewarding the founders up-front.

2. What are the Fundamentals of Energi?

  • Scalability
1 minute block times and a 2 megabyte block size limit provide Energi with a vast transaction capacity for regular on-chain transactions. This allows for plenty of space on the blockchain for extremely fast transactions with very low fees.
Energi features a powerful on-chain scaling solution with a system of incentivized full nodes called Energi Masternodes. A Masternode is a full node backed by 1,000 NRG collateral that provides level 2 scalability to the Energi Cryptocurrency. 40% of the emissions of Energi is allocated to Masternodes, providing an extremely strong incentive to grow the number of full nodes and scalability of the network.

  • Funding
A key feature of Energi is its powerful treasury system. Energi makes up to 40% of the emissions available to the treasury, to be utilized in a manner that provides maximum benefit.
Treasury allocation is decentralized, allowing for submitted proposals from anyone, to be voted on by Masternodes and paid out from the emissions.
Energi has a 14 day treasury cycle, allowing quick payments for proposal authors and contributors, as well as strategic responsiveness to effective proposals. Energi is guided by the principle that every dollar spent from its funding model should yield more than one dollar of value in return. Thanks to a 14 day treasury cycle, the Energi team is able to measure results and respond quickly to changes in strategy.

  • Governance
The Energi Treasury is a decentralized governance model designed with Masternodes as caretakers, with voting rights on how to best utilize treasury funding.
This governance model reduces risk by allowing participation from everyone who holds 1,000 NRG as a Masternode. In this way, the Energi community can work together on how to best build the strategic direction of Energi.

  • Inflation
Energi Cryptocurrency has a simple rate of inflation at 1 million coins per month with no maximum cap. This ensures consistency in funding allocation, Masternode rewards, and PoS rewards, making the economics of the cryptocurrency more understandable for everyone who chooses to participate in Energi.
No coin supply limit ensures that Energi is prepared for the long term, avoiding “bubble” economics caused by dramatic early inflation that in most coins only serves to benefit founders ahead of increased adoption.

  • Distribution
Energi conducted a fair launch on April 14, 2018 with no ICO and no premine. Prior to launch, the Energi team gave a specific time and date for the launch of its main net, which its vibrant community eagerly awaited, so that mining could begin fairly, again avoiding centralization among the coin founders (It's important to note that Energi has transitioned from Proof-of-Work consensus to a Proof-of-Stake consensus).
Energi Masternode payments were designed to begin at block 216000, which occurred on September 18, 2018, almost 160 days after launch. This ensured time to list Energi on exchanges, and to grow the community, encouraging fair and equitable distribution before the extremely powerful Masternode rewards began. It is all too common for Masternode coins to feature a premine, which has the effect of centralizing distribution among the founders and early adopters.
From 2018 to 2020, Energi distributed nearly 4 million coins to users who contributed to spreading awareness of the project with social media activities about Energi, such as tweets, follows, and subscriptions on all major social media platforms.

  • Decentralization
Decentralized governance with Masternodes helps to ensure everyone is able to participate in Energi and help guide the project to achieve the best results. The change to the requirement to run a Masternode, from 10 000 NRG to 1 000 NRG, has allowed more people to be involved and boosted decentralization for the whole project.

  • Long Term Vision
All of the above features seamlessly work together in concert, to ensure that Energi is prepared for the long term. Rather than try to closely find a niche in the market, Energi is prepared to adapt and overcome all challenges for many years to come. Energi’s use case is that of a traditional cryptocurrency, such as Bitcoin. However, Energi’s strategy is to excel by avoiding the pitfalls of previous projects, while further utilizing and improving upon the most powerful ideas in the cryptocurrency space.

3. Coin Specs

Ticker: NRG
Block time: 1 minute.
Hashing Algorithm: Dagger-Hashimoto (similar to Ethereum).
Masternode requirements: 1,000 Energi.
Treasury cycle: Every 14 days.
Approximately 1 million Energi will be released per month. The allocations can be observed easily as “10/10/40/40.”
10% will go to the Energi Backbone.
10% to the PoS participants
40% to Masternodes.
40% to the Treasury.
Thus, for every block, allocations are: 2.28 Energi to the Backbone, 2.28 Energi to the PoS participants, 9.14 Energi to the Treasury, and 9.14 Energi to Masternodes.
Since Treasury allocations are paid in two-week cycles, they are made in lump sums of approximately 184,000 Energi every 14 days.
In order to allow for widespread distribution of Energi before Masternode payments began, Masternode rewards were delayed until day 150. This was to allow the airdrop campaign to be completed and ensure a large amount of NRG is spread out through the community. Until that point, Masternode rewards were redirected to the Treasury. Thus for the first 5 months, the Treasury gained approximately 368,000 Energi every two weeks (about 800k Energi per month). The airdrop campaign was designed to release ~4 million Energi to the community.

4. How to Get Started

  • Energi Official Website
https://www.energi.world/

  • Social Media
Bitcointalk: https://bitcointalk.org/index.php?topic=4912743
Discord: https://discordapp.com/invite/sCtgNC3
Facebook: https://www.facebook.com/energicrypto/
Github: https://github.com/energicryptocurrency
LinkedIn: https://www.linkedin.com/company/energi-core/
Medium: https://medium.com/energi
Publish 0x: https://www.publish0x.com/@energi
Reddit: https://www.reddit.com/energicryptocurrency/
Steemit: https://steemit.com/@energi
Telegram: https://t.me/energicrypto
Telegram Announcement: https://t.me/energiannouncements
Twitter: https://twitter.com/Energicrypto
YouTube: https://www.youtube.com/channel/UCCABQly0NNR2j_M_iDpy8mA/

  • Exchanges
DigiFinex: https://www.digifinex.com/trade/BTC/NRG
KuCoin - BTC: https://www.kucoin.com/trade/NRG-BTC
KuCoin - ETH: https://www.kucoin.com/trade/NRG-ETH
HitBTC - BTC: https://hitbtc.com/NRG-to-BTC
BitBNs - INR: https://bitbns.com/trade/#/nrg
Mercatox - BTC: https://mercatox.com/exchange/NRG/BTC
Mercatox - TUSD: https://mercatox.com/exchange/NRG/BTC
Bithumb - BTC: https://www.bithumb.pro/en-us/spot/trade?q=NRG-BTC
Bithumb - USDT: https://www.bithumb.pro/en-us/spot/trade?q=NRG-USDT
Citex - BTC: https://trade.citex.co.ktrade/NRG_BTC
Citex - USDT: https://trade.citex.co.ktrade/NRG_USDT
Beaxy - BTC: https://www.beaxy.com/trading-paiNRG-BTC
CoinAll - USDT: https://www.coinall.com/spot/full#product=nrg_usdt
WhiteBit - BTC: https://whitebit.com/trade/NRG_BTC
HitBTC - BTC: https://hitbtc.com/exchange/NRG-to-BTC

  • Energi Block Explorers
Gen 3 Explorer: https://explorer.energi.network/
Gen 3 Calculator: https://nexus.energi.network/reward-calculator
Gen 2 Explorer: https://explorer.gen2.energi.network/

  • Wallet Downloads
Gen 3 - MyEnergiWallet: https://docs.energi.software/en/downloads/myenergiwallet
Gen 3 - Core Node: https://docs.energi.software/en/downloads/core-node

  • Proof-of-Stake Setup Guides
https://docs.energi.software/en/staking-guide

  • Masternode Setup Guide
https://docs.energi.software/en/Masternode-guide

5. FAQs

Gen 3 Wiki: https://docs.energi.software/en/home
General: https://docs.energi.software/en/faq/general
Core Node Sync: https://docs.energi.software/en/core-node-troubleshoot
Keystore: https://docs.energi.software/en/faq/keystore
Masternode: https://docs.energi.software/en/faq/Masternode
Migration: https://docs.energi.software/en/faq/migration
Security: https://docs.energi.software/en/faq/security
Staking: https://docs.energi.software/en/faq/staking
submitted by energicrypto to energicryptocurrency [link] [comments]

/r/Monero Weekly Discussion – June 06, 2020 - Use this thread for general chatter, basic questions, and if you're new to Monero

Index

  1. General questions
  2. Wallet: CLI & GUI
  3. Wallet: Ledger
  4. Nodes

1. General questions

Where can I download the Monero wallet?

There are multiple Monero wallets for a wide range of devices at your disposal. Check the table below for details and download links. Attention: for extra security make sure to calculate and compare the checksum of your downloaded files when possible.
Please note the following usage of the labels:
⚠️ - Relatively new and/or beta. Use wallet with caution.
☢️ - Closed source.

Desktop wallets

Wallet Device Description Download link
"Official" GUI / CLI Windows, macOS, Linux Default implementation maintained by the core team. Use this wallet to run a full node and obtain maximum privacy. Integrates with hardware wallets. Current version: 0.15.0.1 / 0.15.0.4. GetMonero.org
MyMonero Windows, macOS, Linux Lightweight wallet -- you don't need to download the blockchain and run a node. MyMonero was developed with the assistance of the core team. It also has web-based and iOS versions. MyMonero.com
Exodus Windows, macOS, Linux ⚠️ / Multi-asset wallet. Exodus.io
ZelCore Windows, macOS, Linux ⚠️ / Multi-asset wallet. It also has Android and iOS versions. Zeltrez.io
Guarda Windows, macOS, Linux ⚠️ ☢️ / Multi-asset wallet. Guarda.co

Mobile wallets

Wallet Device Description Download link
Monerujo Android Integrates with Ledger (hardware wallet). Website: https://www.monerujo.io/. Google Play / F-Droid / GitHub
MyMonero iOS Website: https://mymonero.com/ App Store
Cake Wallet iOS Website: https://cakewallet.io/ App Store
X Wallet iOS Website: https://xwallet.tech/ App Store
Edge Wallet Android / iOS Multi-asset wallet. Website: https://edge.app/ Google Play / App Store
ZelCore Android / iOS ⚠️ / Multi-asset wallet. Website: https://zelcore.io/ Google Play / App Store
Coinomi Android / iOS ⚠️ ☢️ / Multi-asset wallet. Website: https://www.coinomi.com/ Google Play / App Store
Moxi / Guarda Android / iOS ⚠️ ☢️ / Multi-asset wallet. Website: https://guarda.co/ Google Play / App Store
Exa Wallet Android / iOS ⚠️ Website: https://exan.tech/ Google Play / App Store
Wookey Wallet Android / iOS ⚠️ Website: https://wallet.wookey.io/ Google Play / F-Droid / App Store
Exodus Android / iOS ⚠️ / Multi-asset wallet. Website: https://www.exodus.io/monero/) Google Play / [App Store](https://apps.apple.com/app/exodus-crypto-wallet/id1414384820

Web-based wallets

Wallet Description Link
MyMonero Web version of the MyMonero wallet. Web
XMRWallet Web wallet with TOR support. Web / Onion URL
Guarda Multi-asset wallet. Web

How long does it take for my balance to unlock?

Your balance is unlocked after 10 confirmations (which means 10 mined blocks). A block is mined approximately every two minutes on the Monero network, so that would be around 20 minutes.

How can I prove that I sent a payment?

The fastest and most direct way is by using the ExploreMonero blockchain explorer. You will need to recover the transaction key from your wallet (complete guide for GUI / CLI).

How do I buy Monero (XMR) with Bitcoin (BTC)?

There are dozens of exchanges that trade Monero against Bitcoin and other cryptocurrencies. Check out the list on CoinMarketCap and choose the option that suits you best.

How do I buy Monero (XMR) with fiat?

How can I quickly exchange my Monero (XMR) for Bitcoin (BTC)?

There are multiple ways to exchange your Monero for Bitcoin, but first of all, I'd like to remind you that if you really want to do your part for Monero, one of the simplest ways is to get in touch with your merchant/service provider and request for it to accept Monero directly as payment. Ask the service provider to visit the official website and our communication channels if he or she needs help with system integration.
That being said, the community has been recommending two services in particular, XMR.TO and MorphToken. These services are only recommendations and are operated by entities outside the control of the Monero Project. Be diligent.

How do I mine Monero? And other mining questions.

The correct place to ask questions and discuss the Monero mining scene is in the dedicated subreddit MoneroMining. That being said, you can find a list of pools and available mining software in the GetMonero.org website.

2. Wallet: CLI & GUI

Why I can't see my balance? Where is my XMR?

Before any action there are two things to check:
  1. Are you using the latest available version of the wallet? A new version is released roughly every 6 months, so make sure you're using the current release (compare the release on GetMonero.org with your wallet's version on Settings, under Debug info).
  2. Is your wallet fully synchronized? If it isn't, wait the sync to complete.
Because Monero is different from Bitcoin, wallet synchronization is not instant. The software needs to synchronize the blockchain and use your private keys to identify your transactions. Check in the lower left corner (GUI) if the wallet is synchronized.
You can't send transactions and your balance might be wrong or unavailable if the wallet is not synced with the network. So please wait.
If this is not a sufficient answer for your case and you're looking for more information, please see this answer on StackExchange.

How do I upgrade my wallet to the newest version?

This question is beautifully answered on StackExchange.

Why does it take so long to sync the wallet [for the first time]?

You have decided to use Monero's wallet and run a local node. Congratulations! You have chosen the safest and most secure option for your privacy, but unfortunately this has an initial cost. The first reason for the slowness is that you will need to download the entire blockchain, which is considerably heavy (+70 GB) and constantly growing. There are technologies being implemented in Monero to slow this growth, however it is inevitable to make this initial download to run a full node. Consider syncing to a device that has an SSD instead of an HDD, as this greatly impacts the speed of synchronization.
Now that the blockchain is on your computer, the next time you run the wallet you only need to download new blocks, which should take seconds or minutes (depending on how often you use the wallet).

I don't want to download the blockchain, how can I skip that?

The way to skip downloading the blockchain is connecting your wallet to a public remote node. You can follow this guide on how to set it up. You can find a list of public remote nodes on MoneroWorld.
Be advised that when using a public remote node you lose some of your privacy. A public remote node is able to identify your IP and opens up a range for certain attacks that further diminish your privacy. A remote node can't see your balance and it can't spend your XMR.

How do I restore my wallet from the mnemonic seed or from the keys?

To restore your wallet with the 25 word mnemonic seed, please see this guide.
To restore your wallet with your keys, please see this guide.

3. Wallet: Ledger

How do I generate a Ledger Monero Wallet with the GUI or CLI?

This question is beautifully answered on StackExchange. Check this page for the GUI instructions, and this page for the CLI instructions.

4. Nodes

How can my local node become a public remote node?

If you want to support other Monero users by making your node public, you can follow the instructions on MoneroWorld, under the section "How To Include Your Node On Moneroworld".

How can I connect my node via Tor?

This question is beautifully answered on StackExchange.
submitted by AutoModerator to Monero [link] [comments]

/r/Monero Weekly Discussion – May 23, 2020 - Use this thread for general chatter, basic questions, and if you're new to Monero

Index

  1. General questions
  2. Wallet: CLI & GUI
  3. Wallet: Ledger
  4. Nodes

1. General questions

Where can I download the Monero wallet?

There are multiple Monero wallets for a wide range of devices at your disposal. Check the table below for details and download links. Attention: for extra security make sure to calculate and compare the checksum of your downloaded files when possible.
Please note the following usage of the labels:
⚠️ - Relatively new and/or beta. Use wallet with caution.
☢️ - Closed source.

Desktop wallets

Wallet Device Description Download link
"Official" GUI / CLI Windows, macOS, Linux Default implementation maintained by the core team. Use this wallet to run a full node and obtain maximum privacy. Integrates with hardware wallets. Current version: 0.15.0.1 / 0.15.0.4. GetMonero.org
MyMonero Windows, macOS, Linux Lightweight wallet -- you don't need to download the blockchain and run a node. MyMonero was developed with the assistance of the core team. It also has web-based and iOS versions. MyMonero.com
Exodus Windows, macOS, Linux ⚠️ / Multi-asset wallet. Exodus.io
ZelCore Windows, macOS, Linux ⚠️ / Multi-asset wallet. It also has Android and iOS versions. Zeltrez.io
Guarda Windows, macOS, Linux ⚠️ ☢️ / Multi-asset wallet. Guarda.co

Mobile wallets

Wallet Device Description Download link
Monerujo Android Integrates with Ledger (hardware wallet). Website: https://www.monerujo.io/. Google Play / F-Droid / GitHub
MyMonero iOS Website: https://mymonero.com/ App Store
Cake Wallet iOS Website: https://cakewallet.io/ App Store
X Wallet iOS Website: https://xwallet.tech/ App Store
Edge Wallet Android / iOS Multi-asset wallet. Website: https://edge.app/ Google Play / App Store
ZelCore Android / iOS ⚠️ / Multi-asset wallet. Website: https://zelcore.io/ Google Play / App Store